Best current price£59.21from eBay
Shopping.co.uk recommended and popular offers
eBay£59.21Visit shop 16pcs Inner Bearing Extractor Blind Remover Bushes Puller Slide Hammer Tool Kit
Visit shop4 offers from £59.21 - £67.49
View price history by clicking the chart icon.
This 16-piece bearing extractor set from Neilsen is designed for automotive professionals and DIY mechanics who need to efficiently remove inner bearings, blind bushes, and pullers. Its key benefit is the comprehensive range of adaptors and collets, ensuring versatility for various sizes. A potential caveat is the need for some mechanical knowledge to correctly select and apply the right components for a specific job.
| Model Part Number | CT3385 |
|---|---|
| Brand | Neilsen |
This set is primarily designed for removing inner bearings and bushes that are housed within a component or in blind holes, where internal access is possible for the collets.
Select the collet that fits snugly inside the inner diameter of the bearing or bush you need to remove. There should be minimal play for effective grip.
The set includes three screw adaptor sizes: M6 x 1.0, M8 x 1.25, and M10 x 1.5.
No, this set is specifically for internal bearings and blind bushes. It requires an internal surface to grip onto.
The set includes ten collets with inner diameter ranges from 8-11mm up to 54-58mm.
Yes, the set comes with a case to keep all the components organized and protected.
The slide hammer provides a concentrated, impactful force that is effective for dislodging seized or tightly fitted bearings and bushes, often more so than static pulling methods.
Ensure the screw adaptor is correctly threaded into the collet and that the slide hammer attachment is securely fastened to the adaptor.
Select a collet size that provides a snug fit. If the fit is loose, the collet may slip. For some applications, a slight tapping with a mallet might help seat the collet.
Verify that the correct collet and adaptor are used. Ensure the screw adaptor is firmly engaged. Sometimes, applying a penetrating oil and allowing it to soak can help loosen seized components before attempting extraction again. Ensure you are applying force directly to the component.
Check that all threaded connections between the slide hammer, screw adaptor, and collet are tightened securely before use. Do not overtighten to avoid stripping threads.
Setup:
Compatibility:
This set is designed for inner bearings, blind bushes, and puller applications where a secure internal grip can be achieved by the collets. It is compatible with components within the size ranges specified by the collets (8mm to 58mm) and requires a corresponding screw thread for the adaptors (M6, M8, M10).
Care:
After use, clean all components with a dry cloth to remove grease and debris. Store the set in its original case to prevent loss or damage to individual parts. Avoid using excessive force that could damage the tool or the component being removed.
