Draper Detail Sander - 280W - 230V

The sander uses standard hook and loop sanding sheets. You can easily find replacements at most hardware stores.

The sander uses a hook and loop system. Simply peel off the old sheet and attach a new one to the pad.

The tri-base design allows you to reach corners and tight spaces effectively, making it ideal for detail work.

While the sander can be used on some metals, it's primarily designed for wood and similar materials. Always use appropriate safety gear and techniques.

There is a dial or switch on the sander to adjust the speed settings. Choose a setting appropriate for the material and task at hand.

Allow the sander to cool down before resuming use. Check for any obstructions or excessive pressure during sanding.

Always wear safety glasses and a dust mask. Work in a well-ventilated area and avoid prolonged contact with the sanding dust.

Check the power cord and outlet. Ensure the power switch is in the 'on' position.

Check the sanding sheet and ensure it is securely attached and not damaged. Also, inspect the base pad for any damage.

Check if the sanding sheet is worn or clogged. Increase the speed setting if appropriate for the material.

Make sure the dust extraction port is properly connected to a vacuum cleaner. Check for any blockages in the port or vacuum hose.