Apec DOT 4 Brake Fluid
--Premium specification Brake and Clutch Fluid
--Exceeds international spec...Apec DOT 4 Brake Fluid
--Premium specification Brake and Clutch Fluid
--Exceeds international specifications & standards
--Corrosion protection formula
--low moisture formula ensuring vapor lock protection
--High boiling point
--Maximises the performance of ABS systems
--High quality brake fluid produced by the worlds largest specialists in brake fluid
--Produced by the brake fluid suppliers for F1
--The product shall fully meet the requirements of the latest issue of the US FMVSS 116 DOT 4, DOT 3, SAE J 1703, SAE J 1704 and ISO 4925 (Classes 3, 4 & 6) Specifications.
premium specification Brake and Clutch FluidExceeds international specifications & standardsCorrosion protection formulalow moisture formula ensuring vapor lock protectionhigh boiling point
This guide provides essential information for users of Apec DOT 4 Brake and Clutch Fluid (ABF3005). Designed for automotive enthusiasts and mechanics, this fluid maximizes braking performance and protects against corrosion. A key consideration is that proper handling and disposal of brake fluid are crucial for safety and environmental protection.
All features
Model Part Number
ABF3005
Brand
Apec
Extended Product Information
FAQs
What is the difference between DOT 3 and DOT 4 brake fluid?
DOT 4 brake fluid typically has a higher boiling point than DOT 3, providing better performance under extreme braking conditions.
Can I mix DOT 3 and DOT 4 brake fluid?
Yes, they are generally compatible, but it's best practice to use the type recommended in your vehicle's owner's manual.
How often should I change my brake fluid?
Most manufacturers recommend changing brake fluid every 2-3 years, or according to your vehicle's service schedule.
What should I do if brake fluid spills on my car's paint?
Rinse the area immediately with plenty of water. Brake fluid can damage paint if left for extended periods.
Where can I dispose of used brake fluid?
Take it to a local recycling center, auto parts store, or hazardous waste disposal site. Never pour it down the drain or into the environment.
Why is the boiling point of brake fluid important?
A higher boiling point helps prevent vapor lock, a condition where the fluid vaporizes under high heat, reducing braking effectiveness.
What does "corrosion protection" mean?
Corrosion inhibitors in the fluid help protect metal components in the brake system from rust and other forms of degradation.
Troubleshooting
Spongy brake pedal feel.
Bleed the brake system to remove air bubbles. This is the most common cause.
Brakes feel weak or ineffective.
Check for leaks in the brake lines. Inspect brake pads and rotors. Make sure the fluid is the correct type and not contaminated.
Brake fluid is dark or contaminated.
Flush and replace the brake fluid. This is typically done as part of routine maintenance.
Pros and Cons
Pros
Exceeds international standards.
Protects against corrosion.
Prevents vapor lock.
Optimized for ABS systems.
High boiling point for improved performance.
Cons
Requires proper disposal to comply with environmental regulations.
Can absorb moisture over time if not stored correctly.
Must be handled carefully to avoid spills and skin contact.
Not suitable for all brake systems; check compatibility.
Setup, Compatibility & Care
Compatibility: Apec ABF3005 is compatible with most vehicles that require DOT 4, DOT 3, or similar brake fluid. Always check your vehicle's owner's manual for specific requirements.
Procedure:
Clean the brake fluid reservoir before opening.
Carefully remove the old fluid, avoiding spills.
Add Apec ABF3005 to the correct level.
Bleed the brake system to remove air.
Care:
Avoid skin contact with the fluid.
Store in a sealed container away from moisture and direct sunlight.
Dispose of used fluid according to local regulations. Never pour it down the drain.
Keep the container tightly sealed to prevent moisture absorption.