Best current price£110.41from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£110.41Visit shop Festo Compact Cylinder 32Mm Bore 5Mm Stroke Iso 21287 Double Acting - 554238
Visit shop3 offers from £110.41 - £123.64
View price history by clicking the chart icon.
This guide is for engineers and technicians working with pneumatic automation systems. The Festo ADNGF compact cylinder offers a reliable and durable solution for precise linear motion, featuring self-adjusting cushioning and compatibility with position sensors. A potential consideration is its specific stroke length, which may require careful integration into systems needing longer travel.
| Model Part Number | ADNGF-32-10-PPS-A |
|---|---|
| Brand | Festo |
At 6 bar of air pressure, the cylinder delivers a theoretical advance force of 483 N.
It means the cylinder automatically adjusts the cushioning effect at the end of its stroke based on the speed and load, providing a smoother stop without manual adjustment.
Yes, the cylinder will function mechanically without sensors. However, you will not have electronic feedback on the piston's position.
This cylinder adheres to the ISO 21287 standard, which specifies dimensions and performance for compact cylinders.
Refer to the official Festo datasheet for the precise operating temperature range, but typically these cylinders operate between -20°C and +80°C, depending on the seal material.
The ADNGF series features an integrated design with a guide rod and yoke plate that inherently prevents piston rod rotation during operation. Ensure the cylinder is mounted correctly to allow this feature to function.
The port size depends on the specific model variant, but typically for a 32mm bore cylinder, G1/4 or similar pneumatic fittings are common. Consult the product datasheet for exact specifications.
Check air supply pressure and connections. Ensure valves are functioning correctly and directing air to the appropriate ports.
Verify air pressure is adequate. Check for air leaks in the lines or cylinder seals. Ensure the load does not exceed the cylinder's capacity at the given pressure.
The self-adjusting cushioning should handle this; however, if excessive noise persists, verify the air pressure is not too high or that the cushioning adjustment (if applicable via external valves) is set correctly.
Ensure the correct type of sensor compatible with magnetic pistons is used. Check sensor alignment with the piston's path. Verify sensor wiring and power supply.
Confirm the load is applied axially and that there are no external torsional forces. The internal anti-rotation feature is robust, but extreme side loads can challenge it. Ensure proper mounting alignment.
Setup:
Compatibility:
Care:
