Best current price£19.63from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£19.63Visit shop Liberon Grain 126954 Floor Oil Clear 1 Litre
Visit shop
B&Q£20.24Visit shop B&Q - Floor Oil Clear 1 Litre
Visit shop20 offers from £19.63 - £51.13
View price history by clicking the chart icon.
Liberon Floor Oil is designed for homeowners and professionals looking to protect and enhance interior timber surfaces, offering a durable, soft sheen finish that highlights the natural grain of wooden and parquet floors. It is an excellent choice for high-traffic or moisture-prone areas like kitchens and bathrooms due to its water, heat, and alcohol resistance, though users should note it requires significant curing time, with 8 hours between coats and a 24-hour final drying period.
| Model Part Number | 126955 |
|---|---|
| Brand | Liberon |
No, Liberon Floor Oil is intended for untreated real wooden floors. Any existing wax or finish must be completely sanded off before application.
Yes, because it is water, heat, and alcohol resistant, it is an ideal choice for moisture-prone areas like kitchens and bathrooms.
One litre of Liberon Floor Oil provides coverage for approximately 14 square metres.
No, this product is designed for easy cleanup; brushes and rollers can be cleaned using water.
While it depends on the absorbency of the wood, typically two to three thin coats are recommended for optimal protection.
No, the product is formulated to be slip-resistant once it has fully cured.
Ensure the room is well-ventilated and the ambient temperature is moderate, as high humidity or cold temperatures can significantly increase drying time.
Ensure the floor was properly sanded and cleaned of all dust before application. Use a high-quality applicator and maintain a "wet edge" to prevent lap marks.
This often indicates that the coat was applied too heavily. Allow additional time for the surface to cure or lightly buff the surface once fully dry.
Before applying, ensure the timber surface is clean, dry, and free of any previous finishes or wax. This product is specifically formulated for untreated real wooden floors and parquet. To apply, use a brush or roller to coat the timber evenly. Allow 8 hours of drying time between coats to achieve the desired protective layer. Once the final coat is applied, wait at least 24 hours for the floor to fully dry before resuming normal activity. Tools used for application should be cleaned thoroughly with water immediately after use.
