ECO-WORTHY 12V DC Submersible Well Water Pump - 96W - 1.6GPM - 230ft Lift
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This ECO-WORTHY 12V DC Submersible Well Water Pump is designed for users needing a reliable water source powered by solar or battery. Its key benefit is its versatility in power options and broad application for wells, ponds, and rivers, ideal for transferring water to tanks. A potential caveat is the need for careful setup of the solar connection to ensure optimal performance.
All features
| Model Part Number | L07030101004-1 |
|---|---|
| Brand | ECO-WORTHY |
Extended Product Information
FAQs
Can I connect this pump directly to a solar panel without a charge controller or battery?
Yes, the pump is designed to be directly connected to a 200W solar panel or higher. However, performance will vary with sunlight intensity. For consistent operation, a battery backup is recommended.
What is the minimum well diameter required for this pump?
The pump is suitable for wells with a diameter of 4-1/8 inches or larger.
What type of batteries can I use with this pump?
You can use various 12V batteries, such as those found in tractors, lawnmowers, or cars. Deep cycle batteries are ideal for sustained use.
How do I safely lower the pump into a well?
A small hole is provided above the pump for attaching a rope. Use a strong, durable rope to lower and retrieve the pump. Never use the power cord or any wiring to lift the pump, as this can cause damage and create a safety hazard.
What is the maximum vertical distance this pump can push water?
The pump has a maximum lift capability of 230 feet.
What is the flow rate of the pump?
The pump provides a flow rate of 1.6 Gallons Per Minute (GPM).
Can this pump be used in saltwater or chemically treated water?
While the pump can operate in various water sources, it is recommended to rinse it with fresh water after use if it has been submerged in saltwater or chemically treated water to prolong its lifespan.
Troubleshooting
Pump not turning on
Verify that the power source (solar panel or battery) is providing sufficient voltage (12V). Check all electrical connections for proper contact and polarity. Ensure the power source is active (e.g., sufficient sunlight for solar panels).
Low water flow or no water output
Check the pump's intake for blockages from debris like sand, leaves, or weeds. Ensure the pump is fully submerged. Verify the lift height does not exceed the pump's maximum capacity (230ft). Check for kinks or obstructions in the discharge hose.
Pump runs intermittently
This could indicate an unstable power supply. Ensure the solar panel is receiving direct sunlight or that the battery is adequately charged. Check for loose electrical connections that may be causing power interruptions.
Pump makes unusual noise
The noise may be caused by the pump running dry or by debris in the impeller. Turn off the pump, check for blockages at the intake, and ensure it is properly submerged in water.
Pros and Cons
Pros
- Versatile power options (solar or battery)
- Suitable for deep wells and surface water sources
- Environmentally friendly when powered by solar
- Robust lift capability for elevated water transfer
- Easy to connect and set up for basic use
Cons
- Requires a compatible solar panel (200W+) or 12V battery
- May require additional components for a complete solar system setup
- Lift rate might be insufficient for very high-demand applications
- Reliance on power source means performance varies with sunlight or battery charge
Setup, Compatibility & Care
Setup:
- Identify a suitable 12V power source: a 200W or higher solar panel or a 12V battery (e.g., car, tractor, deep cycle battery).
- Connect the positive (+) terminal of the pump to the positive output of the power source.
- Connect the negative (-) terminal of the pump to the negative output of the power source.
- Attach a sturdy rope to the reserved hole above the pump for lowering and retrieving it; do not use the power cord or any wiring to lift the pump.
- Ensure the pump is fully submerged in water before operation.
Compatibility:
- Well Diameter: Requires wells of 4-1/8 inches or larger.
- Power Source: Compatible with 12V DC systems, specifically solar panels rated 200W or above, or 12V batteries.
Care:
- Regularly inspect the intake for debris that could cause blockages.
- If used in saltwater or chemically treated water, rinse the pump with fresh water after each use.
- Store in a dry place when not in use.
- Ensure electrical connections are clean and secure.