DC Power Splitter - 3 Way Adapter - 2.1mm - kenable

The connector size is 5.5 x 2.1mm DC barrel.

You can use this with any power supply that has a 5.5 x 2.1mm DC barrel connector and provides the necessary voltage and amperage for your connected devices.

Add up the amperage requirements of all the devices you plan to connect. Make sure your power supply provides at least that much amperage, preferably a little more for safety.

No, this splitter is not waterproof. Avoid using it in wet or damp conditions.

The splitter itself can handle the current provided by your power supply. The important factor is the power supply's capacity and the combined current draw of all connected devices.

This splitter will not convert the voltage. All devices connected to the splitter must have the same voltage requirements as the power supply.

Yes, you can use this splitter for any devices that use a 5.5 x 2.1mm DC barrel connector and have the same voltage requirements.

Check the power supply connection to the splitter and the device connections. Ensure the power supply is turned on and functioning. Verify the power supply has sufficient output to power all connected devices. Try a different power supply.

Check the individual device's power connection to the splitter. Test the device with a different power source to rule out a device fault. Ensure the total current draw of all devices does not exceed the power supply's maximum current.