Hycote Truck Bed Liner Paint - Black - 400ml
Best current price£73.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£73.99Visit shop B&Q - Black Fast Drying Truck Bed Liner Paint 4.8 Litres 400Ml X12
Visit shopB&Q£73.99Visit shop One Offer
1 offer from £73.99
View price history by clicking the chart icon.
B&QB&Q - Black Fast Drying Truck Bed Liner Paint 4.8 Litres 400Ml X12
Free delivery in 1–3 days
£73.99
Visit shop
Product Information
Full details
This guide is for owners of pick-up trucks looking to protect and enhance their truck bed. The Hycote Truck Bed Liner Paint offers a tough, durable, and anti-slip finish, guarding against load damage and corrosion. A key caveat is that it's not suitable for very flexible surfaces.
All features
| Colour | Black |
|---|---|
| Model Part Number | XUK989 |
| Brand | Hycote |
| Container Volume | 400 |
Extended Product Information
FAQs
How many cans do I need for a standard truck bed?
A single 400ml can typically covers a significant portion of a standard truck bed. For full coverage or larger beds, two cans are often recommended. Always check the coverage area stated on the product label.
Can this paint be applied over existing bed liners?
Yes, it can be applied over pre-painted surfaces and most existing bed liners, provided the surface is clean, dry, and in good condition. Light abrasion may improve adhesion.
What is the drying time?
The paint is quick-drying. Touch dry times are usually within 30-60 minutes, and it can typically be handled after a few hours. Full curing may take longer, depending on temperature and humidity. Refer to the product label for specific times.
Is the finish permanent?
The coating is designed for durability but is not necessarily permanent. It can be removed with appropriate solvents if needed, although it offers long-lasting protection.
Can I paint over this if I want a different color later?
Yes, once fully cured, the surface can be prepared and repainted with compatible coatings. However, for a different color, applying a primer might be beneficial.
Does it protect against rust?
Yes, the paint provides a barrier that helps prevent corrosion and rust formation on the metal surface beneath it.
Troubleshooting
Uneven or patchy coverage
Ensure the can was shaken thoroughly before and during use. Apply in thin, even coats, maintaining a consistent distance from the surface. Multiple coats may be necessary.
Paint not adhering well
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. Lightly abrading the surface before application can improve adhesion.
Runs or drips
The paint was likely applied too thickly or from too close a distance. Apply in multiple thin coats, allowing adequate drying time between applications. If drips occur, allow to dry and carefully sand smooth before re-coating.
Texture is too smooth or too rough
Adjust the spray distance and speed. Holding the can closer and moving slower can result in a more pronounced texture, while holding it further away and moving faster will create a finer texture.
Pros and Cons
Pros
- Provides excellent protection against load damage and abrasion.
- Creates a highly effective anti-slip surface for increased safety.
- Offers good resistance to corrosion and UV fading.
- Quick drying time reduces the inconvenience of application.
- Suitable for use on various substrates including metal and most plastics.
Cons
- Not suitable for use on very flexible surfaces.
- Single pack coating may not offer the same build or longevity as two-pack systems.
- Requires appropriate surface preparation for optimal adhesion.
- Textured finish may be more difficult to clean than a smooth coating.
Setup, Compatibility & Care
Preparation is Key: For optimal results, ensure the surface is clean, dry, and free from grease, oil, and loose paint. Lightly abrade or prime surfaces if necessary, following manufacturer recommendations for the specific material.
Compatibility: This paint is suitable for use on pre-painted surfaces, bare metal, and most common plastics found in truck beds. Avoid application on highly flexible plastics or rubberized surfaces.
Application: Shake the can well before use. Apply in thin, even coats from approximately 25-30cm distance. Multiple coats may be required for full coverage and desired texture. Allow adequate drying time between coats as per can instructions.
Care: Clean the treated surface with mild soap and water. Avoid using harsh solvents or abrasive cleaning tools that could damage the textured finish. Regularly inspect for any signs of wear and touch up as needed.