Eterna Bathroom Heater - 2kW
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to quickly and efficiently heat their bathroom using the Eterna 2kW Bathroom Heater. It's ideal for small to large bathrooms, providing adjustable heat output. A key benefit is its IP21 rating for safety, but it requires wall mounting outside specific bathroom zones. This guide will help you understand its features, proper setup, and maintenance.
All features
| Brand | Eterna |
|---|
Extended Product Information
FAQs
How do I turn the heater on and off?
Use the pull cord switch to turn the heater on and off.
Where should I mount the heater?
The heater must be wall-mounted outside of Bathroom Zones 1 and 2.
Can I control the temperature?
Yes, you can adjust the temperature using the internal adjustable thermostat.
What is the warranty?
Please refer to your purchase documentation or contact Eterna customer support for warranty details.
What is the IP21 rating?
The IP21 rating means the heater is protected against condensation and is safe for use in a bathroom environment.
What are the heat output options?
The heater offers two heat output options: 1kW and 2kW, selected via the internal load switch.
How do I clean the heater?
Wipe the exterior with a damp cloth. Do not use harsh chemicals.
Troubleshooting
Heater won't turn on.
Check the power connection and ensure the pull cord switch is in the 'on' position. Also, check your circuit breaker.
Heater is not producing heat.
Verify that the thermostat is set to a suitable temperature. Also, ensure the internal load switch is set to the desired output (1kW or 2kW).
Heater trips the circuit breaker.
This could indicate an overload or a fault. Turn off the heater immediately and consult a qualified electrician.
Pros and Cons
Pros
- Quick and easy way to warm a bathroom.
- Adjustable heat settings for energy efficiency.
- IP21 rating ensures safety in a bathroom environment.
- Easy to operate with a pull cord.
- Provides up to 2kW of heat output.
Cons
- Requires wall mounting, which may require professional installation.
- Must be installed outside of Bathroom Zones 1 and 2, limiting placement options.
- May not be suitable for very large bathrooms without additional heating.
- Requires an electrical outlet for operation.
- Thermoplastic construction may show wear over time.
Setup, Compatibility & Care
Setup:
- Professional Installation Recommended: Due to electrical connections and safety regulations, professional installation by a qualified electrician is recommended.
- Wall Mounting: The heater must be securely wall-mounted, adhering to the provided instructions.
- Placement: Ensure the heater is installed outside of Bathroom Zones 1 and 2.
- Electrical Connection: Connect the unit to a suitable electrical outlet.
Compatibility:
- Voltage: Check that the heater's voltage matches your home's electrical supply.
- Bathroom Zones: Ensure the heater is installed outside of Zones 1 and 2 to meet safety standards.
Care:
- Cleaning: Wipe the exterior with a damp cloth; do not use harsh chemicals or abrasives.
- Maintenance: Regularly check for dust and debris buildup. If necessary, consult a professional for internal cleaning.
- Safety: Always disconnect the power before cleaning or performing any maintenance.