Best current price£1.66from UK Office Direct
Shopping.co.uk recommended and popular offers
UK Office Direct£1.66Visit shop 5 Star Fire Exit Running Man Arrow R Sign Vinyl 150X300mm
Visit shop3 offers from £1.66 - £1.92
View price history by clicking the chart icon.
The 5 Star Fire Exit Running Man Arrow R Sign is an essential safety component for facility managers and business owners aiming to maintain regulatory compliance and clear emergency egress paths. It offers high visibility for critical navigation during fire incidents, though it is intended for flat, clean indoor surfaces and may require additional mounting hardware for textured or porous walls.
| Brand | 5 Star |
|---|
Yes, it is designed to comply with standard health and safety requirements for fire exit signage.
The adhesive backing is designed for smooth, flat surfaces. For brick or rough concrete, you will likely need to use mechanical fixings or an additional adhesive sealant.
This model is a standard sign. Please check your specific local fire codes to see if you require photoluminescent signage for your premises.
This sign is optimized for indoor use. Exposure to direct sunlight and heavy rain may reduce the lifespan of the adhesive and the clarity of the print.
Use a hairdryer on a low heat setting to gently warm the adhesive, which will make it easier to peel away without pulling paint or plaster.
The wall surface was likely dusty or textured. Clean the surface thoroughly with isopropyl alcohol, allow to dry, and if necessary, use double-sided industrial mounting tape to reinforce the edges.
If applied recently, carefully peel it off, starting from one corner, and reapply. If the adhesive has fully cured, do not attempt removal as it may damage the wall surface.
To install the 150x300mm sign, first ensure the mounting surface (such as a door frame, wall, or panel) is completely clean, dry, and free of dust or grease. Peel the protective backing from the adhesive side and apply firm, even pressure across the entire surface of the sign for at least 30 seconds to ensure a secure bond. Avoid placing the sign on surfaces recently painted or treated with silicon-based cleaners. For ongoing care, simply wipe the surface with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents, as these may damage the sign's surface or degrade the adhesive integrity.
