Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop 2x Bartoline Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop
B&Q£29.99Visit shop B&Q - 2X Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop3 offers from £22.99 - £29.99
View price history by clicking the chart icon.
Bartoline Ready Mixed Lightweight Filler is an ideal solution for DIYers and professionals seeking a high-performance, non-shrinking repair compound for interior and exterior cracks. Utilizing advanced glass bead technology, this filler provides a smooth, brilliant white finish that requires minimal effort, though it is not suitable for structural applications or use on metal and plastic surfaces.
| Model Part Number | LF1000 |
|---|---|
| Brand | Bartoline |
No, this filler is not suitable for use on plastics or metals.
The filler can typically be overpainted in approximately 30 minutes, depending on ambient conditions.
Usually, no. It dries to a smooth, finished surface that often requires no sanding.
Yes, it is suitable for exterior use, but it must be protected from rain until set and sealed with an oil-based paint.
Store in a cool, dry place above 5°C and ensure it is kept away from frost.
No, this product is for filling cracks and surface imperfections only; it should not be used for structural fixing.
Ensure the application thickness is not excessive; for very deep holes, apply in thinner layers, allowing each to set.
Check that the surface is clean and dry. Ensure you are not over-wetting the filler and verify that the ambient temperature is not too high, which can affect viscosity.
This may occur if the surface was damp or contaminated with dust. Clean the area thoroughly and ensure it is bone-dry before re-applying.
Before beginning, ensure the target surface is clean, dry, and free of loose dust or debris. The filler is compatible with most standard wall and ceiling substrates, including plaster and wood. Note that it is not compatible with metal or plastic components, nor should it be used for anchoring structural bolts. When storing the product, keep the container in a cool, dry environment where temperatures remain above 5°C. Avoid exposing the container to freezing conditions to maintain the consistency of the filler, and ensure the lid is tightly sealed after every use to prevent the product from drying out.
