Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 194mm - 18mm

PSE stands for 'Planed Square Edge'. It means the timber has been machined to have smooth, straight, square edges and faces, making it ready for immediate use without further planing or sanding.

While it is possible, this Whitewood Spruce timber is not naturally weather-resistant. For outdoor use, it would require significant treatment with appropriate wood preservatives, sealants, and paints to protect it from moisture, UV radiation, and pests. It is primarily recommended for interior applications.

You can cut this timber with common woodworking tools such as a handsaw, jigsaw, or circular saw. Always ensure your blade is sharp and suitable for wood to achieve clean cuts.

To prevent warping or damage, store unused timber flat on a level surface in a cool, dry, and well-ventilated area. Avoid storing it directly on concrete or in areas with fluctuating humidity or direct sunlight.

Yes, the smooth, planed surface of this spruce timber makes it an excellent base for painting, staining, varnishing, or other finishes. Light sanding before priming is recommended for the best results.

Standard wood screws or nails are suitable for attaching this timber. Choose fasteners with a length appropriate for your project, ensuring they provide a secure hold without penetrating through the visible side.

This often occurs due to inconsistent moisture exposure. Store timber flat in a consistent, dry environment. For minor warps, you might be able to clamp it straight during installation, or cut around the warped section.

Ensure you are pre-drilling pilot holes before inserting screws, especially when working close to the ends or edges of the timber. The pilot hole should be slightly smaller than the screw's core diameter.

Although PSE, a light sanding with fine-grit sandpaper (e.g., 180-220 grit) before applying primers and finishes will help create a perfectly smooth surface for absorption and adhesion.