Setup, Compatibility & Care Instructions
Setup:
- Ensure the vehicle is on a flat, stable surface and the handbrake is engaged.
- Locate the puncture if possible, but it's not essential for application.
- Remove the valve cap from the tyre.
- Screw one of the included plastic gloves onto the nozzle of the sealant bottle.
- Attach the nozzle firmly to the tyre's valve stem.
- Squeeze the bottle to inject the entire 300ml of sealant into the tyre.
- Remove the nozzle and replace the tyre valve cap.
- Immediately drive the vehicle for a few miles (approx. 3-5 miles) at a slow speed (max 30 mph) to help distribute the sealant evenly inside the tyre.
- After distribution, check tyre pressure and inflate to the recommended level. Visit a tyre professional as soon as possible for a permanent repair.
Compatibility:
This sealant is generally compatible with most standard car tyres. However, it is intended for temporary, emergency use only and may not be suitable for large cuts, sidewall damage, or severely damaged tyres.
Care:
Store the sealant bottle in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children.