Pipe Clips for Garden Irrigation Pipe - 16mm - 50 Pack

Ensure your garden irrigation system remains organized and secure with these 16mm pipe clips. Desi...

Best current price£15.28from OnBuy.com

One Offer

1 offer from £15.28

View price history by clicking the chart icon.

OnBuy.com16Mm Pipe Clips For Garden Irrigation Pipe To Hold It Tidily Against Brick Walls 7625683418466
Free delivery in 1–3 days
£15.28
Visit shop

Product Information

Full details

These 16mm pipe clips from E-BEST-OFFER are designed for home gardeners and professional landscapers looking to secure irrigation lines against brick or timber surfaces. The primary benefit is a tidy, sag-free irrigation layout that prevents long-term pipe damage, though users should be mindful that they require manual hammering, which may necessitate pilot holes when mounting into dense masonry.

All features

BrandE-BEST-OFFER

Extended Product Information

FAQs

Can these be used on metal surfaces?

These clips are designed for brickwork and timber; they are not intended for use on metal surfaces.

Do I need any special tools?

A standard hammer is usually all that is required for timber; a masonry drill may be needed for brick.

Is the 16mm measurement the inside or outside diameter?

The 16mm measurement refers to the outer diameter of standard irrigation pipes.

How many clips should I use for a 5-meter pipe run?

Following the recommended 40cm spacing, you will need approximately 13 clips for a 5-meter run.

Are these clips UV resistant?

They are designed for outdoor garden use and are built to withstand standard weather conditions.

Troubleshooting

Clip nail bends while hammering into brick

The surface is likely too dense. Drill a small pilot hole using a masonry bit before hammering the clip.

Pipe is slipping out of the clip

Verify the pipe diameter is exactly 16mm. If the pipe is slightly smaller, consider adding a thin layer of rubber tape to the pipe before clipping.

Clip is not holding flush against the wall

Ensure the surface is level and you are not driving the nail into a mortar joint, which may be too soft to hold the clip securely.

Pros and Cons

Pros

  • Prevents irrigation lines from sagging or kinking
  • Suitable for both wood and brick surfaces
  • Generous 50-pack quantity for larger projects
  • Simple, tool-free design for rapid setup

Cons

  • Requires manual hammering which can damage fragile walls
  • May require pilot holes for hard brickwork
  • Not suitable for pipe diameters other than 16mm

Setup, Compatibility & Care

To install, hold the 16mm pipe in the desired position against your surface and place the clip over the pipe. Use a hammer to drive the nail portion of the clip into the material. If you are attaching these to brickwork, we highly recommend drilling a small pilot hole first to prevent the masonry from cracking and to ensure the nail seats properly. For timber installations, the clips can usually be hammered in directly. Periodically inspect your irrigation lines after the first few weeks of operation to ensure no clips have loosened due to temperature-induced pipe expansion and contraction.

Price History

DatePrice
Visit shop