Shopping.co.uk

FloPlast Solvent Weld Swept Tee - 32mm - Black

FloPlast Solvent Weld Swept Tee - 32mm - Black

The FloPlast ABS Solvent Weld Swept Tee is a versatile plumbing component designed for use with so...

Best current price£1.46from hartlepoolplumbing.supplies

Best offers

Shopping.co.uk recommended and popular offers

Trusted
The Range£5.19Visit shop

Floplast Abs Solvent Weld Swept Tee 32Mm Black - Ws22 - Perfect For Waste Systems - Grey

Visit shop

All Offers

21 offers from £1.46 - £9.36

View price history by clicking the chart icon.

hartlepoolplumbing.suppliesFloplast Black 40Mm Abs Solvent Weld Swept Tee
Free delivery in 1–3 days
£1.46
Visit shop
Professional Building SuppliesFloplast Black Solvent Weld Waste Tee - 40Mm
Free delivery in 1–3 days
£1.82
Visit shop
eBayFloplast WS22BL 32mm (36mm) ABS Solvent Weld Waste System Tee - Black
Free delivery in 1–3 days
£5.10
Visit shop
The RangeFloplast Abs Solvent Weld Swept Tee 32Mm Black - Ws22 - Perfect For Waste Systems - Grey
Free delivery in 1–3 days
£5.19
Visit shop
OnBuy.comFloplast Abs Ws22b Solvent Swept Tee - 32Mm 5055149913808
Free delivery in 1–3 days
£5.49
Visit shop

Product Information

Full details

The FloPlast ABS Solvent Weld Swept Tee is designed for plumbers and DIY enthusiasts needing to create reliable connections within solvent weld waste pipe systems. Its primary benefit is ensuring waste flows in the correct direction while offering durability through its ABS construction. A key consideration is that solvent weld joints are permanent once made.

All features

BrandFloPlast

Extended Product Information

FAQs

What does 'swept' mean in relation to this tee?

A 'swept' tee has a curved, gradual bend on the branch connection. This ensures that waste flows smoothly into the main pipe run in the correct direction, helping to prevent blockages compared to a sharp, 90-degree elbow.

Can I use this tee with push-fit waste pipes?

No, this is a solvent weld fitting and is only compatible with solvent weld waste pipes. It requires solvent cement for a permanent joint and is not designed for push-fit systems.

What are the available sizes for this swept tee?

The FloPlast ABS Solvent Weld Swept Tee is available in 32mm, 40mm, and 50mm diameter options.

How long does a solvent weld joint take to set?

The joint should be held for about 30 seconds after joining. It needs to set for at least 5 minutes before it can be moved, and the entire system should be left for 12 hours before testing.

What standards does this product conform to?

This fitting conforms to BS EN 1455-1:2000 and BS 5255 standards and is kitemarked.

Can I disassemble a solvent weld joint if I make a mistake?

No, solvent weld joints create a permanent bond. Once the solvent cement has set, the joint cannot be demounted. Any correction requires cutting out the faulty joint and re-making it.

Is this fitting suitable for underground drainage?

While made of durable ABS, this fitting is specifically designed for solvent weld waste pipe systems, typically used within buildings for above-ground drainage. Always check specific project requirements for underground applications.

Troubleshooting

Joint leaks after installation

Ensure surfaces were clean and dry before applying solvent cement. Re-check that the pipe was fully inserted and twisted for proper contact. Solvent weld joints are permanent; a leak may indicate a faulty joint that needs to be cut out and re-made.

Difficulty inserting pipe into fitting

Check for obstructions or damage inside the fitting socket and on the pipe end. Ensure the correct size fitting and pipe are being used. Lightly deburr the pipe end if necessary.

Solvent cement not setting properly

Ensure the correct type of solvent cement (SC250 recommended for ABS) is used. Verify that the temperature is within the recommended range for the solvent cement. Insufficient application of cement or poor contact can also affect setting.

Pros and Cons

Pros

  • High durability due to ABS material.
  • Ensures correct waste flow direction.
  • Suitable for a wide range of domestic and commercial uses.
  • Meets recognized industry standards.
  • Permanent, secure solvent weld joints.

Cons

  • Solvent weld joints are permanent and cannot be demounted.
  • Requires proper ventilation and safety precautions during installation due to solvent cement.
  • Not suitable for solvent-free jointing systems.

Setup, Compatibility & Care

Setup & Installation:

  1. Preparation: Ensure the outer wall of the pipe and the inner wall of the fitting are clean, dry, and free from dust, grit, or swarf.
  2. Apply Solvent Cement: Apply a uniform layer of SC250 solvent cement to both the pipe end and the inside of the fitting socket.
  3. Join: Immediately push the pipe fully into the fitting. Give it a slight twist (about a quarter turn) to ensure full contact and even spread of the cement.
  4. Secure: Hold the joint firmly for approximately 30 seconds to prevent movement while the initial set occurs.
  5. Clean: Wipe away any excess solvent cement with a damp cloth.
  6. Curing: Allow the joint to set for at least 5 minutes before moving it. The installed system should be left for a minimum of 12 hours before testing under pressure.

Compatibility:

  • This fitting is designed exclusively for use with solvent weld waste pipes.
  • Available in 32mm, 40mm, and 50mm sizes. Ensure compatibility with your existing pipework dimensions.

Care:

  • The ABS material is generally maintenance-free. Regular flushing of waste pipes with hot water is recommended to prevent buildup.
  • Avoid using abrasive cleaners or solvents on the exterior of the fitting, as this could damage the finish.

Safety Precautions:

  • Always work in a well-ventilated area when using solvent cement.
  • Keep solvent cement away from heat sources and open flames.
  • Avoid contact with skin and eyes. If contact occurs, wash thoroughly with soap and water. Wear appropriate protective gloves and eyewear.

Price History

DatePrice
Visit shop