Hope Bearing - 61802 2RS
Best current price£4.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£4.99Visit shop Hope -Wheel Bearing - 61802 2RS
Visit shopeBay£4.99Visit shop One Offer
1 offer from £4.99
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone needing a durable and reliable bearing for their equipment, particularly those familiar with the Hope brand. The key benefit is its robust construction for consistent performance. A potential caveat is its specific sizing, requiring precise application. This Hope Bearing, model number 5055168023168, offers dependable operation with its 2RS sealing, designed to protect against contaminants and retain lubrication.
All features
| Model Part Number | 5055168023168 |
|---|---|
| Brand | Hope |
Extended Product Information
FAQs
What does '2RS' mean on a bearing?
'2RS' indicates that the bearing has two rubber seals, one on each side, providing enhanced protection against contamination and lubricant loss.
Can I service or re-grease this bearing?
This bearing is sealed for life and typically not designed for user re-greasing. Attempting to open or re-grease sealed bearings can damage the seals and introduce contaminants.
How do I know if the 61802 size is correct for my application?
You should check the technical specifications or the part number of the component you are repairing. The 61802 designation refers to specific inner and outer diameter measurements (10mm ID, 24mm OD, 6mm Width).
What is the typical lifespan of this bearing?
Lifespan varies greatly depending on the application, load, speed, and environmental conditions. However, Hope bearings are known for their durability under normal operating conditions.
Where can I find the dimensions for the 61802 bearing?
Standard ISO 61802 bearings have an inner diameter of 10mm, an outer diameter of 24mm, and a width of 6mm. Always confirm with the product's specific datasheet if available.
Is this bearing suitable for high-speed applications?
The suitability for high-speed applications depends on the specific operating conditions and load. While designed for reliable performance, extreme speeds might require bearings with different specifications or sealing types.
Troubleshooting
Bearing feels stiff or doesn't spin freely
Ensure the bearing is correctly installed and not being over-tightened or subjected to uneven pressure. Check for any foreign debris that may have entered during installation. Verify the housing or shaft is not deformed.
Premature wear or noise after short use
This could indicate improper installation (e.g., cocked bearing, excessive load) or exposure to contaminants if seals were compromised. Verify installation and consider if the application exceeds the bearing's intended load or environmental rating.
Seals appear damaged or dislodged
The bearing may need replacement. Avoid operating the bearing if seals are compromised, as this will lead to rapid internal damage.
Pros and Cons
Pros
- Excellent sealing protects against environmental contaminants.
- High-quality materials ensure smooth and consistent rotation.
- Designed for longevity, reducing replacement frequency.
- Reliable performance expected from the Hope brand.
Cons
- Specific model number (61802 2RS) means it's not universally compatible.
- May require specialized tools for installation or removal.
- Higher initial cost compared to generic bearings.
Setup, Compatibility & Care
Setup: This bearing is designed to be pressed into a housing or onto a shaft. Proper installation requires precise alignment and appropriate force to avoid damaging the bearing races or seals. It is crucial to use specialized bearing presses or a similar controlled method to ensure the bearing is seated correctly and squarely. Always consult the specific component manufacturer's guide for installation procedures, as it often involves specific torque values or methods.
Compatibility: The Hope Bearing - 61802 2RS has specific internal and external dimensions. Compatibility is limited to applications that call for a bearing of this exact size and type (e.g., 61802 internal diameter, 2RS sealing). Always verify the required bearing size against the component's specifications before purchasing.
Care: To maintain optimal performance, keep the exterior of the bearing clean. Avoid direct high-pressure washing on the seals. While the 2RS seals protect the internal components, prolonged exposure to harsh chemicals or extreme temperatures should be minimized. Lubrication is internal and sealed; re-greasing is typically not required and can damage the seals if attempted without proper knowledge and tools.