JG Speedfit Reducing Pipe Tee - 15mm X 10mm X 10mm
Best current price£8.30from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£8.30Visit shop B&Q - Pem3015Bwp White Push-Fit Reducing Pipe Tee (Dia)15mm X 10mm X 10mm
Visit shopB&Q£8.30Visit shop One Offer
1 offer from £8.30
View price history by clicking the chart icon.
B&QB&Q - Pem3015Bwp White Push-Fit Reducing Pipe Tee (Dia)15mm X 10mm X 10mm
Free delivery in 1–3 days
£8.30
Visit shop
Product Information
Full details
This JG Speedfit Reducing Pipe Tee is designed for plumbers and DIY enthusiasts needing to connect three unequal sized plastic or copper pipes quickly and securely. Its key benefit is a significant reduction in installation time, up to 40% faster than traditional methods, with a simple push-fit and twist-lock mechanism that requires no tools or hot works. A key consideration is the mandatory use of the relevant manufacturer’s pipe insert for all plastic pipes to ensure a proper seal.
All features
| Model Part Number | PEM3015BW |
|---|---|
| Brand | JG Speedfit |
Extended Product Information
FAQs
Do I need any special tools to install this fitting?
No, the JG Speedfit reducing tee is designed for push-fit installation and requires no special tools. You simply push the pipe in and twist the nut to lock it.
Can I use this fitting with lead pipes?
This fitting is designed for copper and specific plastic pipes (PEX, polybutylene). It is not suitable for use with lead pipes.
What is the maximum temperature and pressure rating?
The fitting is suitable for hot and cold water and central heating systems. For specific pressure and temperature limits, please refer to the JG Speedfit technical datasheet for this product series.
How do I remove the fitting if I make a mistake?
To demount, unlock the plastic nut, push the collet towards the body of the fitting, and pull the pipe out. This can be done in seconds without tools.
What is the purpose of the collet?
The collet, with its stainless steel teeth, grips the pipe securely, while the O-ring provides the main seal. Pushing the collet releases the grip during demounting.
Are pipe inserts always necessary?
Pipe inserts are mandatory for all plastic pipes (PEX and polybutylene) to provide support and prevent the pipe from collapsing within the fitting. They are not typically required for copper pipes.
Can this fitting be used underground or in buried applications?
While the materials are resistant to corrosion, it's recommended to consult JG Speedfit's guidelines for buried applications. Often, protective sleeving may be required depending on soil conditions and specific regulations.
Troubleshooting
Fitting leaks after installation
Ensure the pipe was pushed in fully and squarely. Check that the pipe end is clean, free from burrs, and that the correct pipe insert (for plastic pipes) was used and fully inserted. Verify the locking nut is tightened correctly.
Difficulty pushing pipe into the fitting
Ensure the pipe end is not deformed and is cut square. For plastic pipes, confirm the correct size insert is being used and is fully seated. Slightly twisting the pipe as you push can help. Do not force the connection if significant resistance is met; check pipe condition.
Pipe won't release when demounting
Ensure the collet is pushed fully towards the body of the fitting. Check that the locking nut has been fully unlocked. If the pipe is still stuck, there might be debris; try gently wiggling the pipe while holding the collet.
Pros and Cons
Pros
- Significantly reduces installation time compared to traditional methods.
- No special tools or hot works required, improving safety and ease of use.
- Simple push-fit and twist-lock system for quick connections.
- Easy to demount and reposition if needed.
- Durable and resistant to corrosion and scale buildup.
- Suitable for a wide range of plumbing applications.
Cons
- Requires specific pipe inserts for all plastic pipe installations.
- The fitting itself is plastic and may not be suitable for all industrial or extreme pressure applications.
- Requires a clean and chamfered pipe end for a secure seal.
- Not designed for direct burial in certain soil conditions without protection.
Setup, Compatibility & Care
To set up the JG Speedfit Reducing Pipe Tee, ensure the pipe ends are clean, dry, and free from burrs. For plastic pipes (PEX, polybutylene), insert the appropriate manufacturer's pipe support sleeve fully into the pipe end to prevent collapse. Push the pipe firmly and squarely into the fitting until it reaches the internal stop. Twist the plastic nut clockwise to lock the connection. To demount, simply push the collet towards the fitting body and pull the pipe out. This fitting is compatible with copper pipe and JG Speedfit plastic pipes. Regular care involves visually inspecting connections periodically for any signs of damage or leakage, though the material is designed for longevity and resistance to corrosion and scale.
Important Note: Always ensure you are using the correct size pipe inserts for any plastic pipe connections as specified by the pipe manufacturer.