Coaxial Screw Coupler Joiner for Connecting Bare Ended Coax Cable - kenable - 009006

You may need a wire stripper and a screwdriver to tighten the terminal screws. No special tools are required.

While the coupler is sealed, it's best to protect it from direct exposure to the elements to ensure longevity. Consider using a weatherproof enclosure if it's outdoors.

Make sure to strip the correct amount of insulation to provide sufficient contact with the center conductor. Tighten the screws securely, but do not overtighten.

You can use most standard coaxial cables up to 9mm in diameter. Check the cable's specifications if you are unsure.

The plastic outer case is made of a durable material designed to protect the internal connections.

Check the connections at the coupler. Ensure the wires are securely fastened and that there is no loose connection. Also, make sure that the cable ends have been properly stripped.

Verify that the cable diameter is within the 9mm limit. If your cable is too large, the coupler may not work.