Shopping.co.uk

Pepte Isolation Valve - 15mm X 3/8" Flat-Faced Straight Compression X Male Bsp

Pepte Isolation Valve - 15mm X 3/8" Flat-Faced Straight Compression X Male Bsp

This flat faced isolation valve is ideal for connecting 15mm copper pipe to 3/8" flexible tap conn...

Best current price£4.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £4.99 - £7.99

View price history by clicking the chart icon.

eBay15mm x 3/8"" Isolation Valve Flat-Faced Straight Compression x Male BSP
£4.99 delivery
£4.99
Visit shop
B&QB&Q - 15mm X 3/8" Isolation Valve Flat-Faced Straight Compression X Male Bsp
Free delivery in 1–3 days
£7.99
Visit shop

Product Information

Full details

This Pepte isolation valve is designed for plumbers and DIY enthusiasts needing to connect 15mm copper or plastic pipe to 3/8" flexible tap connectors. Its key benefit is providing quick and complete water isolation with a simple 1/4-turn operation. A potential caveat is ensuring the 3/8" BSP flat-faced outlet is compatible with your specific tap connector. This valve offers a reliable solution for both new installations and emergency repairs, featuring a compression inlet and a male BSP outlet for secure water control.

All features

Model Part NumberIVF38S
BrandPEPTE

Extended Product Information

FAQs

What size pipe does the compression inlet accept?

The compression inlet is designed to accept standard 15mm copper or plastic pipe.

What type of tap connector can I use with this valve?

This valve is designed for 3/8" BSP male threaded flexible tap connectors that feature a flat face for sealing.

Do I need to solder this valve in place?

No, this valve uses a 15mm compression fitting for connecting to pipework, which does not require soldering.

How do I operate the valve?

The valve is operated with a 1/4-turn mechanism. Use a screwdriver in the slot to turn it on or off. A quarter turn from fully closed to fully open.

Can this valve be used for gas lines?

No, this valve is designed and rated for water systems only (hot and cold).

What is the benefit of a flat-faced outlet?

A flat-faced outlet, when used with a corresponding flat-faced tap connector, provides a more reliable and secure seal compared to conical fittings, reducing the risk of leaks.

How often should I check for leaks?

It is recommended to check for leaks immediately after installation and then periodically, especially after the initial few uses, as compression fittings can sometimes settle.

Troubleshooting

Valve is leaking from the compression fitting.

Ensure the compression nut is tightened evenly and sufficiently. Check that the olive is correctly seated and that the pipe is clean and free from damage where the olive seals.

Valve is leaking from the 3/8" BSP outlet.

Verify that the flexible tap connector has a 3/8" BSP flat-faced thread and is securely attached. Ensure any seals or washers on the flexi-tail are present and in good condition.

Valve is difficult to turn.

Operate the valve a few times to help loosen it. Ensure no debris is obstructing the mechanism. If it remains stiff, check for overtightening of adjacent fittings.

Water flow is restricted.

Ensure the valve is fully open (1/4 turn). Check that the connected pipework and tap connector are not kinked or blocked.

Pros and Cons

Pros

  • Quick and easy water isolation with 1/4-turn operation.
  • Versatile for both new installations and emergency repairs.
  • No soldering required for copper pipe connection.
  • Secure connection to standard 3/8" flexible tap connectors.
  • Suitable for a wide range of plumbing applications.

Cons

  • Specific 3/8" BSP flat-faced outlet may not be universally compatible with all tap connectors.
  • Requires a screwdriver for operation, unlike lever-handled valves.
  • May require additional adapters if connecting to non-standard fittings.
  • Compression fittings need to be tightened correctly to prevent leaks.

Setup, Compatibility & Care

Setup:

  1. Ensure the main water supply is turned off before installation.
  2. Clean the end of the 15mm copper or plastic pipe.
  3. Slide the compression nut and then the olive onto the pipe.
  4. Insert the pipe fully into the 15mm compression inlet of the valve.
  5. Slide the olive up to the valve and tighten the compression nut securely using appropriate wrenches.
  6. Connect your 3/8" BSP flexible tap connector to the flat-faced male outlet, ensuring a snug fit.
  7. Turn the water supply back on slowly and check for leaks.

Compatibility:

  • Inlet: Compatible with 15mm copper pipe and suitable plastic pipes.
  • Outlet: Specifically designed for 3/8" BSP male threaded connections, commonly found on flexible tap tails. It requires a *flat-faced* connector for a proper seal.

Care:

  • Periodically check the compression fitting for tightness, especially after initial installation.
  • Operate the 1/4-turn valve mechanism occasionally to prevent seizing.
  • Clean the exterior with a damp cloth as needed. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop