Klein Tools VDV026-813 RJ45 Ethernet Cable Tester and Crimper Kit - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Klein Tools VDV026-813 is an Ethernet cable installation kit designed for network technicians and DIY installers who need to create reliable data cable terminations. Its key benefit is the time-saving Pass-Thru™ technology, which simplifies the crimping process and ensures correct wire order. A potential caveat is the specialized nature of the Pass-Thru™ connectors, requiring users to purchase replacements of the same type.
All features
| Colour | Black |
|---|---|
| Model Part Number | VDV026813 |
| Brand | KLEIN TOOLS |
Extended Product Information
FAQs
What types of Ethernet cables can this kit be used with?
This kit is designed for CAT5e, CAT6, and CAT6A round STP (Shielded Twisted Pair) and UTP (Unshielded Twisted Pair) Ethernet cables.
Do I need to buy special connectors for this kit?
Yes, this kit utilizes Klein Tools' exclusive Pass-Thru™ RJ45 connectors, which are specifically designed to work with the included crimper and Pass-Thru™ technology.
How does Pass-Thru™ technology save time?
Pass-Thru™ technology allows the wires to pass through the connector and be visibly checked for correct order before crimping. The tool then trims the excess wires simultaneously, reducing the chance of errors and the need for re-termination.
Is the cable tester included in the kit?
Yes, the kit includes a compact cable tester (Cat. No. VDV526-100) that performs single-button testing for terminated voice and data cables.
What does the tester indicate when a cable fails?
The tester uses fast LED responses to indicate status such as Pass, Miswire, Open-Fault, Short-Fault, and Shield.
Can this kit be used for PoE (Power over Ethernet) installations?
Yes, the connectors and the system are certified for PoE+ cables, making it suitable for networks requiring power delivery over data cables.
What is included in the kit besides the crimper and tester?
The kit includes Klein Tools Pass-Thru™ connectors and a USA-made zippered pouch for storage.
Troubleshooting
Cable tester shows 'Open-Fault' or 'Short-Fault'
Re-terminate the cable end(s). Ensure wires are in the correct order (refer to T568A/B standards) and fully seated in the connector before crimping. Check that the conductor wires are making good contact with the connector pins.
Crimper not trimming wires cleanly
Ensure the wires are correctly aligned and have passed fully through the connector. Check the crimper's trimming blade for any debris or damage. Ensure you are using the correct Klein Tools Pass-Thru™ connectors with the tool.
Tester LEDs do not light up
Ensure the cable is properly terminated and connected to both ends of the tester. Check if the batteries in the tester need replacement (if applicable, though this model typically uses passive testing). Verify the cable itself is not severely damaged.
Connectors do not seat properly on the cable
Verify you are using the correct gauge and type of cable (round STP/UTP) as specified for the Pass-Thru™ connectors. Ensure the cable jacket is stripped to the appropriate length.
Pros and Cons
Pros
- Streamlines cable termination with Pass-Thru™ technology.
- Ensures accurate wiring with visual confirmation and on-tool guide.
- Compact and portable for field use.
- Certified for PoE+ applications.
- Includes essential tools and connectors for immediate use.
Cons
- Requires specific Klein Tools Pass-Thru™ connectors.
- Learning curve for optimal use of Pass-Thru™ technology.
- Primarily designed for RJ45 connectors.
Setup, Compatibility & Care
Setup: To terminate a cable, strip the outer jacket, arrange the inner wires according to the TIA 568A or TIA 568B standard (refer to the wiring guide on the crimper), insert them through the Pass-Thru™ connector until they exit the front, and then use the RJ45 Pass-Thru™ Crimper to crimp the connector and trim the excess wires. Test the terminated cable using the included tester by plugging both ends of the cable into the tester and pressing the button. The LEDs will indicate the cable's status.
Compatibility: This kit is designed for use with CAT5e, CAT6, and CAT6A round STP/UTP cables. The Pass-Thru™ connectors are proprietary to Klein Tools and designed specifically for this system. The tester is compatible with CAT3, CAT5e, and CAT6/6A cables.
Care: Keep all components clean and dry. Store the kit in the provided zippered pouch to protect it from dust and damage. Periodically inspect the crimper jaws and tester LEDs for any debris or damage. Clean the tester and crimper with a dry or slightly damp cloth; avoid harsh chemicals.