Marine Hardwood Plywood - 2440mm x 1220mm x 18mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This B&Q Marine Hardwood Plywood is designed for DIY enthusiasts and professional contractors who need a highly durable, moisture-resistant material for demanding interior and exterior applications. Its primary benefit is superior structural integrity under damp conditions thanks to specialized water-resistant adhesives that prevent delamination. While it offers excellent long-term performance, users should note that as a natural wood product, it still requires proper edge sealing and protective coatings to maintain its lifespan in fully exposed outdoor environments.
All features
| Brand | B&Q |
|---|
Extended Product Information
FAQs
Is this plywood safe for use in marine environments?
Yes, it is designed with water-resistant adhesives that prevent delamination, making it suitable for marine-grade applications, though regular sealing is still required.
Can I use this for outdoor furniture?
Yes, but you must apply an exterior-grade finish, such as a marine varnish or outdoor paint, to protect the wood from UV rays and weathering.
What is the best way to cut this 18mm plywood?
Use a circular saw with a fine-toothed blade. For the cleanest cut, keep the good side facing down if using a circular saw, or facing up if using a jigsaw.
Does the plywood need to be sanded?
It comes with a relatively smooth surface, but light sanding with fine-grit paper is recommended before applying stains or varnishes for a professional finish.
How should I store this plywood?
Store it flat in a dry environment and keep it off the ground using timber bearers to allow airflow underneath.
Can this be used for structural floorings?
The 18mm thickness provides significant strength, but ensure your floor joist spacing complies with local building regulations for your specific load requirements.
Troubleshooting
Visible warping or bowing after purchase
Store boards flat on a level surface away from direct heat sources and ensure they are supported at intervals to prevent sagging.
Edge splintering during cutting
Use a sharp, fine-toothed circular saw blade and apply masking tape along the cut line before sawing to maintain a clean edge.
Moisture absorption at the cut edges
Ensure all exposed cut ends are immediately sealed with a high-quality wood preservative or waterproof sealant.
Pros and Cons
Pros
- High resistance to delamination in humid conditions
- Sturdy 18mm thickness suitable for structural applications
- Standard dimensions ensure compatibility with common building frameworks
- Professional-grade hardwood veneer finish
Cons
- Requires additional surface treatment for prolonged direct water contact
- Heavier than standard soft-wood plywood sheets
- Edges must be sealed properly to prevent moisture ingress
Setup, Compatibility & Care
To ensure maximum performance, all cut edges of the Marine Hardwood Plywood should be treated with a suitable water-repellent sealant or high-quality paint to prevent moisture from entering the core. When installing, use rust-resistant fasteners such as stainless steel or galvanized screws to avoid corrosion over time. For outdoor use, it is highly recommended to apply a UV-resistant wood stain or exterior-grade varnish as a topcoat. Store the sheets flat in a dry, well-ventilated area prior to use to prevent warping or bowing.