Replacement Furniture Legs - Queen Anne - Dark Oak Stain - 150mm High - Set of 4

These legs are versatile and can be used on sofas, chairs, settees, beds, footstools, cabinets, tables, bookcases, and other similar furniture items.

The best way is to try fitting nuts onto the existing bolt on your furniture. If an 8mm nut fits, you need M8. If it's too small, try M10. If it's too big, you need M6. A tape measure cannot accurately determine thread size.

The product description usually specifies what is included. Typically, self-fixing legs require you to use your own 6mm wood screws, which are not always provided.

These specific legs are 150mm high.

While it might be possible, attempting to repaint or re-stain the legs could void any warranty and may not yield professional results due to the existing finish. It is recommended to use them as is.

The product information does not specify the exact material, but they are designed to be durable furniture legs suitable for supporting furniture.

Clean the legs using a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners to protect the Dark Oak stain finish.

Verify that you have ordered the correct fitting type (M8, M10, M6 bolt, or self-fixing). Double-check your measurements or the nut test described in the compatibility section. Contact customer support if unsure.

Ensure the leg is fully screwed in or secured with the appropriate screws. Check that the furniture surface is level and that the leg's fitting is not damaged. Tighten securely.

Wood stains can vary slightly due to natural wood grain and lighting conditions. While efforts are made for consistency, minor variations can occur. Please refer to product images and descriptions.