Best current price£23.93from eBay
Shopping.co.uk recommended and popular offers
eBay£23.93Visit shop Davies Craig Thermal Sensor Adaptor Kit Inc Wiring and Plug - 1/8'' NPT Thread
Visit shop8 offers from £23.93 - £28.54
View price history by clicking the chart icon.
This adaptor kit is for users of Davies Craig digital thermatic Electric Water Pump (EWP) and fan switch kits (0444/0500) who need to replace a 5mm probe-type sensor with a screw-in temperature sensor. The key benefit is the flexibility to use screw-in sensors in 1/4" NPT or 1/8" NPT ports. A caveat is that it specifically replaces the 5mm probe sensor and requires compatible EWP/fan switch models.
| Model Part Number | 465 |
|---|---|
| Brand | Davies Craig |
This adaptor kit is compatible with the Davies Craig 0444 Digital Thermatic EWP / Fan Switch and the 0500 Digital Gauge Thermatic Fan / EWP Switch Kit.
No, this kit is an adaptor only. It allows you to use a screw-in type sensor with your existing Davies Craig EWP/fan switch kit, replacing the standard 5mm probe sensor.
The adaptor is designed to fit into both 1/4" NPT and 1/8" NPT threaded ports.
The adaptor includes a 30cm length of cable to connect the sensor to the EWP / Fan switch.
This adaptor is specifically designed for Davies Craig 0444 and 0500 EWP/fan switch units. Compatibility with other brands is not guaranteed.
Use appropriate thread sealant (like PTFE tape or pipe dope) on the adaptor's threads before screwing it into the NPT port. Tighten securely but avoid overtightening.
Verify the sensor is correctly screwed into the adaptor and the adaptor is securely installed in the port. Check the 30cm cable connection at both the adaptor and the EWP/fan switch for looseness or damage. Ensure the sensor itself is functioning correctly.
Confirm the port is indeed 1/4" NPT or 1/8" NPT. Ensure no thread sealant or debris is obstructing the threads. If the port size is different, this adaptor will not be suitable.
Double-check all electrical connections to the EWP/fan switch and ensure the temperature sensor is properly connected via the adaptor cable. Refer to the EWP/fan switch manual for further troubleshooting.
Compatibility: Ensure your existing Davies Craig unit is either the 0444 Digital Thermatic EWP / Fan Switch or the 0500 Digital Gauge Thermatic Fan / EWP Switch Kit. The adaptor is designed to fit into 1/4" NPT or 1/8" NPT ports.
Setup:
Care:
