Hycote Spray Paint Kit - Blue - 150ml

Thanks to its compressed aerosol technology, a 150ml can provides the same coverage as a conventional 300ml aerosol can.

Yes, provided the plastic surface is properly cleaned, degreased, and primed using a suitable primer compatible with plastics. The included grey primer is designed for a variety of substrates.

The paint is fast-drying, but recoating times will vary depending on temperature and humidity. Always allow sufficient drying time between coats as per general spray paint application guidelines.

While not strictly mandatory for adhesion, the clear lacquer is highly recommended. It provides a protective layer against UV damage, enhances gloss, and increases the durability of the finish.

This is a double acrylic concentrated paint. It offers enhanced durability, better adhesion, and superior resistance to fading compared to standard spray paints. The compressed aerosol technology also means more efficient coverage from a smaller can.

After use, turn the can upside down and spray for a few seconds to clear the nozzle. Store in a cool, dry, well-ventilated area away from heat and direct sunlight.

Ensure the can is held at the correct distance and moved at a consistent speed. Clean the nozzle by turning the can upside down and spraying for a few seconds. If the issue persists, try a new can.

The paint is likely being applied too thickly or from too close. Apply in several lighter coats rather than one heavy coat. Ensure the can is held at the recommended distance (15-25 cm).

The surface may not have been properly prepared or primed. Ensure the surface is clean, dry, and free of contaminants. Use the included primer and allow it to dry fully before applying the color coat.

Confirm the correct color code and vehicle model (Vauxhall/Opel Boracay Blue). Ensure the surface was properly primed, as primer color can affect the topcoat appearance. This product is a specific match and may not be suitable for all blue finishes.