Pirelli Cinturato Gravel M High Performance Gravel Tyre - PIR-4596100

Yes, the Cinturato Gravel M is fully compatible with hookless rims and meets current ETRTO standards.

Yes, these tyres are compatible with inner tubes, though they are designed to perform best when set up tubeless.

It is recommended to check and refresh your tubeless sealant every 3 to 6 months.

The ProWALL casing adds reinforcement to the sidewalls, providing greater puncture protection and increased stability at lower pressures.

While it can be ridden on the road, its tread pattern is optimized for gravel and mixed terrain, so it will be slower and noisier than a dedicated road tyre.

Optimal pressure depends on rider weight, rim width, and terrain. Always start within the manufacturer's suggested range on the sidewall and adjust based on comfort and rim protection needs.

Ensure the tyre bead is positioned deep in the rim's center channel and apply a light soapy water solution to the bead edges to assist with sliding into place.

This may occur during the initial setup of 'Tubeless Ready' tyres. Shake the wheel horizontally to distribute sealant and ride the bike for 10-15 minutes to fully seal the pores.

Check that the tubeless valve is tightened correctly and inspect the rim tape for any lifting or small punctures. Add more sealant if necessary.