Volden Ready Mixed Plasterboard Jointing, Filling & Finishing Compound 25Kg 15L Tub - White

Drying time depends on environmental conditions. Generally, allow several hours to dry. Check the product label for specific drying times.

No, this product is designed for interior use only. It is not suitable for exterior applications.

You will need a filling knife or trowel, a mixing bucket (if required), and sandpaper.

Store in a cool, dry place. Reseal the tub tightly after each use to prevent drying.

Yes, once the compound is completely dry and sanded, you can paint directly over it. Use a primer for the best results.

The shelf life is typically 12 months from the date of manufacture when stored properly.

Clean up spills immediately with water while the compound is still wet.

Ensure proper application technique. Apply in thin coats, allowing each coat to dry completely before sanding and applying the next. Avoid applying too much compound at once.

Allow the compound to dry completely. Use fine-grit sandpaper and sand gently. Ensure you are using the correct sanding technique.

Ensure the working environment is not too hot or dry. If necessary, work in smaller areas to prevent the compound from drying before you can finish.