Best current price£130.35from B&Q
Shopping.co.uk recommended and popular offers
B&Q£130.35Visit shop B&Q - Eagle 5Mp 8 Channel Ai Ahd Cvi Tvi Cvbs Penta-Brid Xvr Dvr Cctv Recorder Bb
Visit shop2 offers from £130.35
View price history by clicking the chart icon.
This kenable Eagle 5MP 8 Channel XVR/DVR is designed for users seeking advanced, reliable surveillance with intelligent features. Its key benefit is the AI-powered Smart Motion Detection (SMD Plus) that significantly reduces false alarms, offering more focused security. A potential caveat is that full-channel SMD Plus is not available on 32-channel devices, though this 8-channel model fully benefits from it. It records up to 5MP resolution across all 8 channels, supports a wide range of camera types (HDCVI, AHD, TVI, CVBS, and IP), and features perimeter protection for proactive alerts.
| Model Part Number | 012120 |
|---|---|
| Brand | kenable |
SMD Plus (Smart Motion Detection Plus) is an AI-driven feature that intelligently filters detected motion events to distinguish between humans, vehicles, and other movements. This significantly reduces false alarms caused by non-threats like falling leaves, rain, or animals.
Yes, this is a Penta-Brid DVR, meaning it's compatible with HDCVI, AHD, TVI, and CVBS analogue cameras. It also supports up to 12 IP camera channels (up to 6MP each), allowing for a mixed system.
The DVR can record video at up to 5 megapixel (5MP) resolution across all 8 analogue channels.
Yes, a SATA hard drive (HDD) is required for recording footage. The DVR itself does not come with a pre-installed hard drive. Please ensure compatibility with the DVR's specifications for maximum capacity.
H.265+ is an advanced video compression standard that significantly reduces bandwidth requirements and storage space needed for video recordings, often by up to 50% compared to H.264, without compromising image quality.
Perimeter Protection allows you to set up intelligent detection rules, such as tripwires and intrusion zones, on analogue channels. The system will only generate an alert when a defined object (human/vehicle) crosses these virtual boundaries, providing proactive security alerts.
Remote access is typically achieved by connecting the DVR to your network and using the manufacturer's dedicated mobile app (e.g., EagleEyes) or PC software. This often utilizes a P2P (peer-to-peer) connection or requires port forwarding on your router.
Ensure the power adapter is securely connected to both the DVR and a working power outlet. Try a different outlet. Verify the power adapter specifications match the device's requirements.
Check that all camera cables are securely connected to both the cameras and the DVR. Verify the camera power supply is active. Ensure the correct camera input mode (HDCVI/AHD/TVI/CVBS/IP) is selected in the DVR settings for each channel.
Ensure the firmware is up-to-date. Calibrate the SMD Plus feature through the system settings. Adjust the detection sensitivity and zone settings in the relevant camera channels. Confirm that only human and vehicle targets are selected for detection.
Verify the DVR is connected to the internet via Ethernet. Ensure the network settings (IP address, gateway, DNS) are correctly configured. Check that port forwarding is set up correctly on your router if accessing from outside the local network. Confirm the cloud service or P2P connection is enabled and active on the DVR.
Check that a compatible HDD is installed and properly formatted. Ensure the HDD is recognized by the DVR and has sufficient free space. Verify recording schedules are active. Reformat the HDD if necessary (backup important data first).
Setup:
Compatibility:
Care:
