Best current price£20.38from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£20.38Visit shop Spraymax 680009 1K Plastic Primer Adhesion Promoter Aerosol 400Ml Light/Silver 4015962853409
Visit shop1 offer from £20.38
View price history by clicking the chart icon.
This SprayMax 1K Plastic Primer Adhesion Promoter is designed for automotive professionals and DIY enthusiasts needing to ensure optimal paint adhesion on plastic surfaces. Its key benefit is promoting excellent adhesion for subsequent coats on most body plastics, leading to a more durable and professional finish. A minor consideration is its specific light silver pigment, which should be accounted for if absolute color neutrality is required before top-coating.
| Colour | Green |
|---|---|
| Model Part Number | 680009 |
| Brand | SprayMax |
It is designed for most common automotive body plastics. For specific or unusual plastics, it's recommended to perform a test application on a hidden area first.
The primer dries very quickly and can be recoated after approximately 10 minutes.
The light silver pigments are intended to be unobtrusive and are generally covered well by standard base coats and clear coats. However, for highly critical color matches, testing is advised.
This product is specifically formulated for plastics. For metal or other substrates, a different primer may be required.
Store in a cool, dry place away from direct sunlight, heat, and open flames. After use, clear the nozzle by spraying upside down.
The product offers excellent yield, meaning a single can provides good coverage for typical automotive plastic parts. Specific coverage will vary based on application technique and surface area.
Ensure the nozzle is not clogged. Clean the nozzle by turning the can upside down and spraying briefly. If the issue persists, replace the aerosol can.
Verify the plastic surface was properly cleaned and prepared before application. Ensure the primer was applied in thin, even coats and allowed adequate drying time before topcoating.
Apply the primer in thinner coats and maintain consistent distance from the surface. Avoid applying too heavily in one pass.
Check if the nozzle is blocked. Turn the can upside down and spray to clear. Ensure the can is adequately warmed to room temperature if used in cold conditions.
Setup:
Compatibility:
This product is compatible with most common automotive body plastics. It serves as a primer for subsequent coats of water-based and solvent-based paints. Always test on an inconspicuous area if unsure about material compatibility.
Care:
After use, turn the can upside down and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight and sources of ignition. Keep out of reach of children.
