Kitchen Kit Shaker Sink/Hob Cabinet - Alby Blue

The flatpack typically includes the cabinet panels, cam locks, dowels, screws for assembly, and soft-close hinges. Door handles, plinths, and decorative panels are sold separately.

With the quick-build cam and dowel system, assembly can be significantly faster than traditional cabinets, often achievable within an hour for experienced DIYers. Novices might take slightly longer.

Yes, the doors are reversible and can be hinged on the left or right side to suit your kitchen configuration. You may need to re-drill for handles if they are not symmetrical.

The cabinet is constructed from robust 18mm thick panels, ensuring durability and a solid feel.

There is a 49mm rear service void, providing space to conceal standard plumbing and wiring.

While designed for sinks and hobs, its standard cabinet dimensions (600mm wide) make it adaptable for other storage needs, provided the internal space is suitable.

Check hinge alignment and ensure the cabinet is level using the adjustable legs. Make sure there are no obstructions in the door's path.

Adjust the 150mm legs to ensure all points are firmly on the floor. Tighten any cam locks if they feel loose.

Ensure the dowels are fully inserted into their respective holes before attempting to lock the cam. Do not overtighten cams, as this can strip the mechanism.

Loosen the hinge screws slightly, adjust the door to the correct position, and then retighten the screws. Refer to the hinge manufacturer's instructions for fine-tuning if available.