Best current price£4.14from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£4.14Visit shop Primaflow Washing Machine Valve Angled - 15Mm
Visit shop4 offers from £4.14 - £8.64
View price history by clicking the chart icon.
This angled washing machine valve from Primaflow is designed for DIY enthusiasts and homeowners needing a reliable shut-off for their washing machine supply. Its key benefit is providing a secure and easy-to-operate connection that helps prevent water damage. A crucial caveat is understanding the BSP thread sizing, as the stated size is not the actual diameter measurement.
| Brand | Primaflow |
|---|
The outlet thread is a 3/4 Inch BSP thread, which is standard for most washing machine hoses. It's important to note that BSP threads are measured differently; a 3/4 Inch BSP thread actually measures approximately 1 inch in diameter.
The compression fitting is designed for a 15mm diameter pipe, which is a standard size in UK plumbing.
This valve is typically designed for cold water supply lines to washing machines. It is not recommended for hot water unless specifically stated otherwise by the manufacturer for a particular variant.
Measure the diameter of your existing thread. If it measures approximately 3/4 inch in diameter, you need the 1/2 Inch BSP version of this valve. If your thread measures approximately 1 inch in diameter, the 3/4 Inch BSP version (as described) is likely correct.
Basic plumbing tools are usually required, including pipe cutters, a deburring tool, two wrenches (one to hold the valve body, one to tighten the nut), and potentially PTFE tape or jointing compound if recommended for the specific pipe type.
It's good practice to operate the lever handle at least once every few months to prevent it from seizing due to inactivity.
The angled design allows the washing machine hose to connect in a more streamlined way, which is beneficial in tight spaces behind appliances, preventing kinks and reducing the overall space needed for the installation.
Ensure the compression fitting is tightened correctly. For the BSP outlet, check that the hose connection is secure and the rubber washer is present and in good condition.
Check that the valve lever is fully open. Inspect the washing machine hose for kinks or blockages. Ensure no debris entered the valve during installation.
Operate the lever a few times to loosen it. If it remains stiff, check for any external obstructions. Over time, occasional use prevents this.
Confirm your thread diameter. A 3/4 Inch BSP thread measures approximately 1 inch in diameter. If your thread measures 3/4 inch in diameter, you need the 1/2 Inch BSP version.
Setup:
Compatibility:
Care:
