Bonda APW Soft Wax Release Agent - 500g
Best current price£30.45from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£30.45Visit shop B&Q - Bonda Apw Soft Wax Release Agent 500G
Visit shopB&Q£30.45Visit shop One Offer
1 offer from £30.45
View price history by clicking the chart icon.
Product Information
Full details
This Bonda APW Soft Wax Release Agent is designed for professionals working with polyurethane foams and various casting materials. Its primary benefit is providing excellent, universal release from a wide array of rigid mould compounds, simplifying demoulding processes and preserving mould integrity. A key consideration is its formulation based on soft waxes, which may require specific application techniques for optimal results.
All features
| Model Part Number | BON07220 |
|---|---|
| Brand | Bonda |
Extended Product Information
FAQs
What types of moulds is this release agent compatible with?
Bonda APW Soft Wax Release Agent is specifically designed for use with rigid mould compounds. Its effectiveness on other mould types may vary.
Can this be used for all types of casting materials?
It is suitable for polyurethane foams and a general range of casting materials. However, for specialized or sensitive materials, a compatibility test on a small area is always recommended.
How many coats of release agent are typically needed?
For optimal results, it is generally recommended to apply 3-5 thin, even coats, allowing each to dry to a haze before applying the next.
How should I store the Bonda APW Soft Wax Release Agent?
Store in a cool, dry place, away from direct sunlight and heat sources, with the container tightly sealed.
What is the consistency of this release agent?
It is formulated with soft waxes, giving it a softer consistency compared to harder wax release agents. This formulation aids in creating a smooth release surface.
Is there a specific drying time between coats?
Allow each thin coat to dry to a haze, which typically takes a few minutes depending on ambient conditions, before applying the subsequent coat.
Can I use this for food-grade casting applications?
This product is not specified for food-grade applications. It is intended for industrial and craft casting where food contact is not a concern.
Troubleshooting
Difficulty releasing the cast material from the mould.
Ensure sufficient coats of release agent were applied and allowed to dry completely. Reapply additional thin coats and allow them to cure before attempting release again. Check that the mould surface was properly cleaned before application.
Uneven surface finish on the cast part.
The release agent may have been applied unevenly. Ensure thin, consistent layers are applied. Avoid thick patches of wax, as these can transfer to the cast part. Ensure the mould surface itself is smooth.
Release agent appears to be 'caking' or clumping.
This can occur if the product is exposed to extreme temperatures during storage or use. Store in a moderate environment and allow the product to reach room temperature before application.
Residue left on the mould or cast part.
Excessive application or incomplete drying can lead to residue. Apply thinner coats and ensure adequate drying time. For removal from the cast part, gentle cleaning with a mild solvent or soap and water may be effective, depending on the cast material.
Pros and Cons
Pros
- Provides excellent release from many rigid mould compounds.
- Suitable for both polyurethane foams and other casting materials.
- Simplifies the demoulding process, saving time and effort.
- Helps maintain the integrity and longevity of moulds.
- The soft wax blend ensures a smooth release surface.
Cons
- May require specific application techniques due to its soft wax nature.
- Primarily designed for rigid mould compounds, performance on flexible moulds may vary.
- Not suitable for all types of plastics or resins; compatibility should be tested.
- Requires proper storage to maintain consistency, especially in fluctuating temperatures.
- Potential for residue if not applied or removed correctly.
Setup, Compatibility & Care
Application:
- Ensure the mould surface is clean and dry.
- Apply a thin, even layer of Bonda APW Soft Wax Release Agent using a soft cloth or sponge.
- For best results, apply multiple thin coats, allowing each to dry to a haze before applying the next. Typically, 3-5 coats are recommended.
- Allow the final coat to dry completely before pouring your casting material.
Compatibility:
- Primarily designed for use with rigid mould compounds.
- Suitable for polyurethane foams and various casting materials.
- Always test on a small, inconspicuous area of your mould and material if unsure about compatibility.
Care & Storage:
- Store the agent in its original container in a cool, dry place, away from direct sunlight and heat sources.
- Keep the container tightly sealed when not in use to prevent drying or contamination.
- Clean application tools with a suitable solvent if necessary, following product safety guidelines.