Best current price£239.40from eBay
Shopping.co.uk recommended and popular offers
eBay£239.40Visit shop Max Meyer 0396 2K UHS Extra Clearcoat Full Kit With 2937 Hardener & 6076 Thinner
Visit shop2 offers from £239.40 - £241.20
View price history by clicking the chart icon.
The Max Meyer 0396 2K UHS Extra Clearcoat is designed for professional automotive refinishers who require a high-solids, high-performance protective layer for vehicle bodywork. Its primary benefit is providing an exceptional, high-gloss finish that stands up to environmental wear, though users should note that as a professional-grade product, it requires precise mixing ratios and specialized spray equipment for optimal results.
| Model Part Number | 1.360.0396/KIT5 |
|---|---|
| Brand | Max Meyer |
| Container Volume | 7500 |
Yes, its excellent leveling properties make it well-suited for spot repairs, provided the blending area is properly prepared.
No, you must use the specific Max Meyer hardener designated for the 0396 system to ensure proper chemical cross-linking and durability.
While it can be used in various settings, a clean, dust-free spray booth is highly recommended to achieve a professional, defect-free finish.
Generally, two full coats are sufficient, but refer to the product TDS for specific thickness requirements.
When stored in original, unopened containers in a cool environment, the product typically lasts up to 24 months.
Reduce the fluid flow on your spray gun or increase the distance between the gun and the panel during the next coat.
Check your air pressure settings or ensure the ambient temperature is within the specified range for the hardener used.
Verify the mixing ratio and ensure the hardener has not expired or been contaminated by moisture.
Before use, ensure the surface is properly cleaned and degreased to prevent contamination. The 0396 clearcoat must be mixed with the appropriate Max Meyer hardener according to the technical data sheet (TDS) specifications for your climate; using the incorrect ratio will compromise the curing process. Always use a HVLP (High Volume Low Pressure) spray gun with the nozzle size recommended by the manufacturer. After application, store the remaining product in a cool, dry place with the lid tightly sealed to prevent premature hardening from moisture exposure. Always wear appropriate respiratory protection, nitrile gloves, and eye protection during application.
