Orac Decor Cornice - BASIXX - CB522

The Orac Decor BASIXX CB522 coving has a height of 6.7cm and a width of 6.7cm. Each piece is 2 metres long.

Each box contains 24 pieces of 2-metre lengths, totaling 48 linear meters of coving.

While versatile, the CB522 is a larger profile. It is best suited for medium to large rooms. For smaller spaces, consider the CB520 or CB521 from the same range for a more proportionate look.

It is recommended to use a specific wall and coving adhesive suitable for the material of the coving and your wall type. Always follow the adhesive manufacturer's guidelines.

Yes, the coving is typically supplied ready for painting. It is recommended to prime it first, then apply your chosen paint (preferably water-based) to match your interior decor.

Yes, the CB522 is designed to be used in conjunction with the smaller CB520 and medium CB521 coving profiles from the Orac BASIXX series for a cohesive design across different areas.

Precise cuts are essential for corners. Use a fine-toothed saw and a mitre box set to the appropriate angles (typically 45 degrees for internal and external corners) for a clean fit.

Ensure surfaces are clean, dry, and free from dust or grease. Use the correct type and amount of adhesive as recommended by the manufacturer. For very large profiles, additional mechanical fixings may be required initially.

Ensure precise mitre cuts for corners. Use a flexible filler or decorator's caulk to fill small gaps after the adhesive has cured. For larger gaps, re-cutting the pieces may be necessary.

Check that sufficient adhesive has been applied evenly. Ensure temporary support is used if the adhesive has a long drying time. Verify that the wall and ceiling surfaces are sound and not crumbling.

Ensure the coving is properly primed before painting. Use a good quality paint and apply thin, even coats. Consider using a roller for a smoother finish on larger flat areas of the profile.