Sealey Chisel - 25 x 450mm - Kango 637

This Sealey chisel is compatible with Kango 637 and a wide range of other Kango models including 430C, 450C, 500, 501, 625, 626, 627, 637HV, 638, 638HV, 750, 750X, 800X, 850X.

This chisel is designed for heavy-duty demolition and chiseling tasks, such as breaking concrete, removing tiles, and working with masonry.

Clean the chisel after each use, apply a light coat of oil to the shank to prevent rust, and store it in a dry place. Sharpen the cutting edge when it becomes dull.

The chisel has a width of 25mm and a length of 450mm.

No, this chisel is specifically designed for compatible Kango hammer drill models that accept this type of shank and chuck system.

Ensure the chisel is fully inserted and the Kango tool's chuck is securely locked. If the issue persists, check your tool's compatibility and functionality, or consider replacing the chisel if it shows signs of wear.

Ensure the chisel shank is fully inserted into the Kango tool's chuck and the chuck mechanism is securely locked. Check for any debris in the chuck.

Verify that the chisel is fully seated and locked in the chuck. Check the compatibility of the chisel with your specific Kango model. Ensure the tool itself is in good working order.

Inspect the cutting edge for damage or excessive wear. Sharpen the edge if dull, or replace the chisel if significantly worn or damaged.

Confirm you are using a compatible Kango model. Ensure the chuck is functioning correctly and locking the chisel securely. Do not continue use if the chisel repeatedly becomes loose.