Best current price£11.54from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.54Visit shop B&Q - Pla-Basic Filament 1.75 mm1Kg RollWith Paper Roll Pla-Basic Filament 1.75mm 1000G Pink
Visit shop5 offers from £11.54 - £14.99
View price history by clicking the chart icon.
The eSUN PLA-Basic filament is a highly reliable, cost-effective 3D printing material designed for hobbyists and professionals who prioritize both speed and print quality. It excels at high-flow printing, offering a smooth finish with minimal warping, making it ideal for rapid prototyping and general modeling. While it offers excellent performance on a wide range of FDM machines, users must strictly adhere to the recommended temperature range to avoid potential extrusion issues or nozzle clogs.
| Model Part Number | PLA-BASIC175Z1P1 |
|---|---|
| Brand | Esun |
Yes, eSUN PLA-Basic is fully compatible with Bambu Lab printers including the P1P, X1, and A1 Mini series.
The recommended extruder temperature range is between 210 °C and 230 °C.
While it can print on various surfaces, a heated bed is recommended to improve adhesion and prevent warping on larger prints.
Yes, the filament is provided on a recyclable paper spool.
PLA is biodegradable and may degrade or deform in high-heat outdoor environments; it is best suited for indoor use or decorative props.
Ensure the printing temperature is within the 210-230 °C range and check that your hotend fan is operating correctly to prevent heat creep.
Clean the print surface with isopropyl alcohol and ensure the first layer height is properly calibrated; consider using an adhesive or brim for large models.
Adjust retraction settings in your slicer; try increasing retraction speed or distance slightly while staying within your printer's mechanical limits.
For best results, set your nozzle temperature between 210 °C and 230 °C. The filament is compatible with almost all standard FDM/FFF 3D printers with a 1.75mm extruder. To ensure longevity, keep the spool in its vacuum-sealed bag with the included desiccant when not in use, as PLA can absorb moisture over time, which may lead to popping sounds during printing or brittle parts. Store in a cool, dry place away from direct sunlight. If you observe stringing, perform a calibration test for your specific printer's retraction settings, as high-speed printing profiles often require different retraction lengths than slower, traditional settings.
Creality Hyper PLA - Grey - 1KGFrom £13
Toupret Joint Tape - 50mm x 150mFrom £12
INIKA Organic Phytofuse Renew - Night CreamFrom £59
INIKA Organic Phytofuse Renew Rich Night CreamFrom £59
SIP MIG Welding Wire - Flux Cord - 0.90Kg - 0.8mmFrom £14
Beurer Hearing Amplifier - HA50From £30
INIKA Organic Phytofuse Renew Rich Day CreamFrom £40
Go Travel World - UK USB-C Adaptor + (25W), WhiteFrom £20
Petzl Neox Belay Device - OrangeFrom £112
Korda - Compac Digital Scales PouchFrom £12
INIKA Organic Phytofuse Renew Day Cream - 50 mlFrom £43
Sony Lens Hood - SonyFrom £70
