Jenolite Hollow Section Cavity Wax Spray with Extension Straw & Nozzle - 500ml - 2-Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Jenolite Hollow Section Cavity Wax Spray is an essential maintenance solution for automotive enthusiasts and machinery operators looking to prevent rust and corrosion in inaccessible areas. By creating a durable, water-repellent barrier inside vehicle frames, sills, and box sections, it significantly extends the structural integrity of your equipment. While it provides excellent protection, users should note that the viscous nature of the wax requires careful application to avoid overspray on exterior surfaces.
All features
| Brand | Jenolite |
|---|
Extended Product Information
FAQs
Can this product be applied over existing rust?
It is best to remove loose rust, but the formula is designed to seal and inhibit further corrosion progression.
How long does it take to cure?
The wax remains semi-flexible and does not fully harden like a paint; it typically becomes touch-dry within a few hours depending on ambient temperature.
Is it safe for electrical components?
Avoid spraying directly onto electrical connectors or sensors as the wax is insulating and may interfere with contacts.
Does it need to be thinned before use?
No, the aerosol formula is pre-mixed and ready to use directly from the can.
How do I remove the wax from my hands or tools?
Use a standard heavy-duty degreaser or a cloth soaked in white spirit.
Troubleshooting
Spray nozzle becomes clogged
Remove the straw and nozzle, soak in a solvent cleaner, or replace if the residue has hardened inside the tip.
Wax is dripping excessively from drainage holes
This is normal during the curing phase; wipe away excess immediately with a cloth dampened with a degreaser or white spirit.
Low pressure during application
Ensure the can is at room temperature; cold cans will reduce the propellant pressure and hinder the spray pattern.
Pros and Cons
Pros
- Superior penetration into seams and crevices
- Effective rust prevention for long-term storage
- Easy-to-use extension straw for hard-to-reach areas
- Generous 2-pack quantity for larger projects
Cons
- Can be messy if not applied with care
- Requires proper ventilation during application
- Difficult to remove if sprayed on visible exterior paint
Setup, Compatibility & Care
Before application, ensure the surface is dry and free of loose dirt or existing rust flakes to maximize adhesion. Shake the can vigorously for at least one minute until the mixing ball rattles freely. When working on vehicles, it is advisable to mask off nearby brake components or suspension parts to prevent contamination. After use, clear the nozzle by holding the can upside down and spraying for a few seconds until clear propellant emerges. Store the cans in a cool, dry place away from direct sunlight and heat sources.