Stonecare4U's Sealer's Gold Matt (dry) Finish Sealer is a highly effective multi-purpose indoor se...Stonecare4U's Sealer's Gold Matt (dry) Finish Sealer is a highly effective multi-purpose indoor sealer for stone. It has been developed to offer excellent sealing and oil & stain resistance to ALL types of indoor stone surfaces, including slate, limestone, granite, quartz, sandstone, travertine, marble and more. It saves you time and money: one sealer does it all! Stonecare4u's Sealer’s Gold Matt (dry) Finish is suitable for most internal porous textured stone and masonry surfaces. Not recommended for use on highly polished, ceramic/glazed or non-porous surfaces. Make sure your stone receives the best care and protection by using the StoneCare4U Essential Gold Matt Finish Stone Sealer 1L. This versatile indoor sealer is designed to provide top-notch sealing and resistance to oil and stains for various indoor stone surfaces such as slate, limestone, granite, quartz, sandstone, travertine, marble, and more. It is a cost-effective solution that saves both time and money. Ideal for most porous textured stone and masonry surfaces indoors, although it is not suitable for highly polished, ceramic, glazed, or non-porous surfaces. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Importantly, performing a small test application in an inconspicuous area before use is also recommended. This will indicate the suitability and effectiveness of Matt Finish for your surface. In addition, please make sure the surface is completely clean and dry before application. After that, apply generously and evenly with a low-pressure sprayer, roller, natural fibre brush or sponge, removing any excess sealer with a dry cloth after 20 to 30 minutes. Next, apply a second application after approximately 45 to 60 minutes, repeating the process. The sealer is highly effective, however, please note that it will take at least 24 hours before the product offers full protection. In the meantime, keep the surface free from water and oil spills, as stains may occur before the sealer has fully cured. Please note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding. Protect your stone surfaces with StoneCare4U Essential Gold Matt Finish Stone Sealer, a 1L solution for lasting protection. This versatile indoor sealer provides superior oil and stain resistance for a range of porous stone surfaces, including slate, limestone, granite, quartz, sandstone, travertine, and marble. A cost-effective choice, it saves you time and money. Ideal for textured stone and masonry surfaces indoors, it's not suitable for highly polished, ceramic, glazed, or non-porous surfaces. Before application, always remove loose debris and wear appropriate safety gear (gloves, eye protection, face mask, and clothing). A test application in an inconspicuous area is highly recommended to check suitability. Ensure the surface is completely clean and dry. Apply generously and evenly using a low-pressure sprayer, roller, natural fibre brush, or sponge. Remove excess sealer with a dry cloth after 20-30 minutes. Apply a second coat after 45-60 minutes, repeating the process. Full protection takes at least 24 hours, keep the surface free from water and oil spills until then to prevent staining. Protect unsealed areas with masking materials. For coloured grouts, a stain test is strongly recommended.
StoneCare4U Essential Gold Matt Finish Stone Sealer 1LFree delivery in 1–3 days£27.95Visit shop →
StoneCare4U Essential Gold Matt Finish Stone Sealer 2.5LFree delivery in 1–3 days£55.95Visit shop →
StoneCare4U Essential Gold Matt Finish Stone Sealer - 2.5L - Clear Matt SealantFree delivery in 1–3 days£55.95Visit shop →
StoneCare4U Essential Gold Matt Finish Stone Sealer 5L - Clear - NewFree delivery in 1–3 days£85.99Visit shop →
StoneCare4U Essential Gold Matt Finish Stone Sealer 5L - Matt FinishFree delivery in 1–3 days£85.99Visit shop →
Product Information
Full details
Stonecare4U's Sealer's Gold Matt (dry) Finish Sealer is a highly effective multi-purpose indoor sealer for stone. It has been developed to offer excellent sealing and oil & stain resistance to ALL types of indoor stone surfaces, including slate, limestone, granite, quartz, sandstone, travertine, marble and more. It saves you time and money: one sealer does it all! Stonecare4u's Sealer’s Gold Matt (dry) Finish is suitable for most internal porous textured stone and masonry surfaces. Not recommended for use on highly polished, ceramic/glazed or non-porous surfaces. Make sure your stone receives the best care and protection by using the StoneCare4U Essential Gold Matt Finish Stone Sealer 1L. This versatile indoor sealer is designed to provide top-notch sealing and resistance to oil and stains for various indoor stone surfaces such as slate, limestone, granite, quartz, sandstone, travertine, marble, and more. It is a cost-effective solution that saves both time and money. Ideal for most porous textured stone and masonry surfaces indoors, although it is not suitable for highly polished, ceramic, glazed, or non-porous surfaces. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Importantly, performing a small test application in an inconspicuous area before use is also recommended. This will indicate the suitability and effectiveness of Matt Finish for your surface. In addition, please make sure the surface is completely clean and dry before application. After that, apply generously and evenly with a low-pressure sprayer, roller, natural fibre brush or sponge, removing any excess sealer with a dry cloth after 20 to 30 minutes. Next, apply a second application after approximately 45 to 60 minutes, repeating the process. The sealer is highly effective, however, please note that it will take at least 24 hours before the product offers full protection. In the meantime, keep the surface free from water and oil spills, as stains may occur before the sealer has fully cured. Please note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding. Protect your stone surfaces with StoneCare4U Essential Gold Matt Finish Stone Sealer, a 1L solution for lasting protection. This versatile indoor sealer provides superior oil and stain resistance for a range of porous stone surfaces, including slate, limestone, granite, quartz, sandstone, travertine, and marble. A cost-effective choice, it saves you time and money. Ideal for textured stone and masonry surfaces indoors, it's not suitable for highly polished, ceramic, glazed, or non-porous surfaces. Before application, always remove loose debris and wear appropriate safety gear (gloves, eye protection, face mask, and clothing). A test application in an inconspicuous area is highly recommended to check suitability. Ensure the surface is completely clean and dry. Apply generously and evenly using a low-pressure sprayer, roller, natural fibre brush, or sponge. Remove excess sealer with a dry cloth after 20-30 minutes. Apply a second coat after 45-60 minutes, repeating the process. Full protection takes at least 24 hours, keep the surface free from water and oil spills until then to prevent staining. Protect unsealed areas with masking materials. For coloured grouts, a stain test is strongly recommended.
eBay£17.95Visit shop 
B&Q£27.95Visit shop 
