Best current price£679.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£679.95Visit shop B&Q - 17,000Lb 12V Winch. 30M Dyneema Rope. Remote Controls.
Visit shop5 offers from £679.95
View price history by clicking the chart icon.
The Winchmax 17,000lb 24V electric winch is designed for operators of heavy-duty recovery trucks and 4x4 vehicles weighing over 3.5 tonnes who require professional-grade pulling power. This unit provides the key benefit of extreme durability and reliability through its billet steel construction and high-torque motor, though users should note that the 24V power requirement makes it unsuitable for standard 12V passenger vehicle electrical systems.
| Brand | Winchmax |
|---|
No, this specific model is engineered exclusively for 24V systems. Installing it on a 12V system will result in inadequate performance or electrical failure.
Yes, synthetic rope is lighter, easier to handle, and does not store the same kinetic energy as steel cable, making it significantly safer in the event of a line snap.
IP67 means the component is protected against dust ingress and can withstand immersion in water up to 1 meter deep for up to 30 minutes.
Keep it clean by rinsing with fresh water to remove grit, avoid dragging it over sharp rocks, and store it out of direct sunlight when not in use to prevent UV damage.
Yes, the unit comes with a pair of long-range wireless remotes for enhanced operational convenience and safety.
Verify the 24V power supply, check all terminal connections for tightness, and ensure the battery is fully charged.
Check the remote batteries, ensure the wireless receiver is clear of obstructions, and re-sync the remote following the manufacturer's pairing sequence.
Check for low battery voltage or loose ground cables; ensure the winch is not being pushed beyond its duty cycle.
Installation requires a vehicle equipped with a 24V battery system. Ensure the mounting plate is rated for a 17,000lb load to avoid frame failure. Regularly inspect the synthetic rope for frays or UV degradation after each use. To maintain the gearbox, keep the unit clean of excessive debris and periodically check electrical connections at the solenoid to prevent corrosion. Ensure the battery system is fully charged before high-load operations to prevent voltage drops that could stall the motor.
