Best current price£14.99from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£14.99Visit shop Finder 38.61.7.024.0050 Relay Module 6A SPDT-CO 24VDC AgNi
Visit shop15 offers from £14.99 - £37.19
View price history by clicking the chart icon.
This Finder 38.61.0.024.0060 relay module is designed for professionals in industrial automation, HVAC, and building management seeking reliable switching for loads up to 6A. Its key benefit is the versatile 24V AC/DC coil voltage and enhanced contact performance with AgNi and gold plating, ensuring durability and signal integrity. A potential caveat for users is the need for specific DIN rail mounting and screwless terminals, which require careful handling during installation.
| Series | 38 Series |
|---|---|
| Model Part Number | 38.61.0.024.0060 |
| Brand | Finder |
The maximum switching current for this Finder 38 Series relay module is 6A.
This relay features Single Pole Double Throw (SPDT) contacts, offering one normally open (NO) and one normally closed (NC) contact configuration.
No, this specific model (38.61.0.024.0060) is designed for a 24V AC or 24V DC coil voltage. For 12V DC operation, you would need a different model from the 38 Series, such as the 38.61.7.012.0050.
Strip the wire to the appropriate length and insert it firmly into the designated slot in the screwless terminal. The internal mechanism will grip the wire. Ensure a solid conductor or a ferrule is used for stranded wire for best results.
The module can operate reliably within a wide temperature range of -40°C to +70°C.
Yes, the AgNi and gold-plated contacts are designed for enhanced performance and durability, making it suitable for frequent switching applications within its rated capacity.
The dimensions are approximately 6.2mm in width, 76mm in height, and 93.6mm in depth.
Verify coil voltage is correct (24V AC/DC) and properly connected. Check if the control signal is actually present and at the correct voltage level. Inspect terminals for secure wire connections.
This can happen if the switched load exceeds the 6A rating or if there is a significant inrush current. The module may need replacement. Ensure the load is within specified limits.
Check for damaged or corroded contacts. Ensure wires are firmly seated in screwless terminals. Ensure the module is operating within its specified temperature range.
Confirm you are using a standard 35mm DIN rail. Ensure the module's mounting clip is not obstructed or damaged.
Setup:
Compatibility:
Care:
