Best current price£32.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£32.79Visit shop B&Q - Original Car Paintwork Restorer & Scratch Remover 500Ml X3
Visit shop4 offers from £32.79 - £40.99
View price history by clicking the chart icon.
T-Cut The Original Restorer is ideal for car owners, DIY enthusiasts, and homeowners looking to rejuvenate weathered or dull paint surfaces by removing oxidation and scratches. Its primary benefit is its long-standing, proven formula that effectively strips away road grime, tar, and light damage to restore original color vibrancy, though users must be careful to avoid applying it to matt finishes, plastic trims, or glass to prevent unsightly residue or surface dulling.
| Model Part Number | TMT500 |
|---|---|
| Brand | T-Cut |
No, T-Cut is formulated for painted metal surfaces and may damage or stain plastic trims.
Yes, it is safe for most standard automotive paints, but always test on a small area first if you are unsure.
Yes, T-Cut removes the top layer of oxidation and old wax; applying a fresh coat of polish or wax afterward is essential to protect the paint.
While it is designed for hand application, it can be used with a machine polisher at low speeds; however, manual application is recommended for better control.
No, if you can feel the scratch with your fingernail, it has likely penetrated the clear coat and may require professional touch-up paint.
Immediately wipe the area with a damp cloth; for dried residue, use a soft brush or a mild all-purpose cleaner.
This may occur if the surface was not clean or if you used too much pressure; follow up with a high-quality car polish or wax to seal the paint.
Ensure you are using a damp cloth for application and that the product has not been allowed to dry fully on the surface before wiping.
Before starting, ensure your vehicle is thoroughly washed and dried to remove loose grit that could cause further scratching. Always perform a patch test on a small, inconspicuous area—such as the inner door sill or a lower bumper section—to ensure colorfastness. Do not use on surfaces with damaged clear coats or deep scratches that penetrate to the primer. If the product comes into contact with plastic trims or rubber seals, wipe it off immediately with a damp cloth to prevent staining. Store the bottle upright in a cool, dry place and ensure the cap is tightly sealed after every use to prevent the formula from drying out.
