Best current price£8.40from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.40Visit shop B&Q - Pz Flat Countersunk Yellow-Passivated Carbon Steel Screw (Dia)6mm (L)80mmPack Of 100
Visit shop1 offer from £8.40
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and builders seeking reliable wood screws. The key benefit is the durable construction and enhanced lubrication for easier driving, making projects smoother. A potential caveat is their specific suitability for wood applications. These screws are constructed from durable, case-hardened material and are wax-coated for reduced friction during installation. They feature a coarse thread and a countersunk flat head design.
| Colour | Yellow |
|---|---|
| Brand | Goldscrew |
These screws use a PZ (Pozidriv) drive. It's important to use a PZ bit that matches the size of the screw head for optimal grip and to prevent stripping.
While the yellow coating offers some protection, these screws are best suited for interior wood applications. For prolonged outdoor exposure, consider screws specifically designed for exterior use with enhanced corrosion resistance.
Partially threaded screws, especially on longer lengths, allow for a stronger clamp on the top material layer without forcing the thread into it, which can be beneficial in certain woodworking applications.
These screws are specifically designed for wood. Their coarse thread and hardened construction are optimized for timber. Using them in metal or masonry is not recommended and may lead to poor performance or damage.
The wax coating acts as a lubricant. It reduces friction between the screw threads and the wood, making it easier and faster to drive the screw, requiring less force and reducing the risk of the screwdriver bit slipping.
Case hardening is a heat treatment process that makes the outer surface of the metal very hard while keeping the core tougher. This provides excellent resistance to wear and stripping at the head and thread surface, while maintaining overall toughness.
Ensure you are using the correct PZ (Pozidriv) bit size and that it is fully engaged with the screw head. Reduce driving torque if necessary, or pre-drill a pilot hole.
Pre-drill a pilot hole that is slightly smaller than the screw's core diameter. Ensure the pilot hole is deep enough for the screw to engage fully.
Verify you are using the correct screw type for wood. Ensure the wood is dry and sound. For longer screws, ensure the partial thread is engaging sufficiently into the base material, or consider a fully threaded screw if needed.
Ensure the pilot hole is countersunk appropriately to accommodate the screw head. If driving into very soft wood, the head might sink too deep; adjust technique or use a washer if necessary.
Setup:
Compatibility:
Care:
