Outdoor Solar Spike Light - ValueLights - Black

The duration the light stays on depends on the amount of sunlight it receives during the day. On a full charge, it typically provides light throughout the evening. If using the PIR sensor, it activates with motion.

No, this is a solar-powered light, so no wiring is required. It is designed for simple spike installation directly into the ground.

The IP rating is IP44, which means it is protected against solid objects larger than 1mm (like wires) and protected against water splashed from any direction.

For optimal performance, the light requires direct sunlight for several hours each day to charge its battery. It will not function effectively in heavily shaded areas.

The light emits a warm white color temperature of 3000K.

The light provides 500 lumens of brightness.

There is typically a switch on the unit that allows you to select between the PIR (motion-activated) mode and a constant glow mode. Refer to the product manual for specific instructions.

Ensure the solar panel is clean and has received sufficient sunlight during the day. Check if the light is switched to 'ON' or the correct mode. Verify that the location is not in constant shadow from trees or buildings.

This could indicate insufficient charging. Relocate the light to a sunnier spot. If using the PIR sensor, ensure the motion detection range is appropriate and the sensor is clean.

Clean the PIR sensor lens. Ensure the sensor is properly switched on and that there are no obstructions. Check if the ambient light is too high, which might prevent the sensor from triggering.

The solar panel may be dirty or degraded. Clean the panel thoroughly. The battery might be nearing the end of its lifespan and may need replacement (if applicable and possible for the model).