Blue Twill Emery Sheet - 25 Pack - 120 Grit

These emery sheets are primarily used for finishing and polishing metal surfaces. They are effective for deburring, smoothing, and preparing metal for further treatment.

No, these emery sheets are specifically designed for metal and should not be used on wood. Using them on wood may lead to poor results and damage to the wood surface.

120 Grit refers to the coarseness of the abrasive particles on the sheet. A lower grit number like 120 indicates a coarser abrasive, suitable for removing material and initial smoothing.

The sheets feature a flexible cloth backing, allowing them to conform to slightly curved or irregular metal surfaces for more precise finishing.

Each sheet measures 230 x 280mm, providing a substantial surface area for various sanding applications.

Each pack contains 25 Blue Twill Emery Sheets.

For best results and to utilize their flexibility, they are best used with hand sanding blocks or flexible backing pads. Ensure the backing is smooth and compatible.

Ensure you are not applying excessive pressure or folding the sheet too sharply. Verify it is used only on compatible metal surfaces and not on sharp edges that could initiate a tear.

Check that the sheet is evenly attached to its backing. Ensure the metal surface is clean and free of contaminants. Try alternating sanding direction or using lighter pressure.

This is normal for aggressive material removal. If wear is exceptionally fast, check for hard spots or contaminants on the metal surface that may be accelerating abrasion. Ensure you are using the appropriate grit for the task.