Davant Solvent Weld Swept Bend - 40mm - Black

The product description indicates it is made from plastic, designed to be chemical resistant and durable, suitable for solvent welding.

A swept bend, in this case a 92.5-degree angle, provides a more gradual change in pipe direction compared to a sharp elbow, which helps to reduce flow resistance and the likelihood of blockages.

You will need a pipe cutter to prepare the pipe ends, and a specific solvent cement and applicator for plastic pipes. A measuring tape may also be useful.

The product is usually dispatched within 3 working days, with UK mainland delivery typically completed in 3-5 working days from the dispatch date.

The product information does not specify suitability for high temperatures. It is generally recommended for cold water and drainage applications unless otherwise stated by the manufacturer.

You can return your goods within 30 days of purchase if you wish to do so.

While durable, prolonged direct exposure to UV sunlight may degrade the plastic over time. Consider protection if installed in direct sunlight continuously.

Ensure the solvent weld was applied correctly, with adequate cement coverage and sufficient holding time during assembly. Re-cut the pipe and fitting and re-make the joint if necessary.

Check for obstructions or damage inside the fitting socket. Ensure the pipe end is cut squarely and is not deformed. Use a pipe stiffener if recommended by the solvent cement manufacturer.

Verify that the correct type of solvent cement for the plastic material is being used. Ensure surfaces were clean and dry before application and that adequate curing time has passed.