Best current price£2.02from eBay
Shopping.co.uk recommended and popular offers
eBay£2.02Visit shop PrimaPress M-Class Pressfit 90 Elbow 15mm - 30076172
Visit shop
The Range£4.62Visit shop Primapress Pressfit 90 Degree Elbow 15Mm - Grey
Visit shop7 offers from £2.02 - £19.80
View price history by clicking the chart icon.
The Primaflow Pressfit 90 Degree Elbow 15mm is a premium copper press fitting designed for professionals in plumbing and gas installations. Its key benefit is a fast, cost-effective, and flameless installation process, reducing labor time and improving safety. A potential caveat is its specific compatibility with M press jaws and tools, requiring users to have the correct equipment. This fitting is suitable for water, gas (range only), and glycol systems, offering high specifications including leak-before-press detection and certifications from WRAS and DVGW.
| Model Part Number | Primapress |
|---|---|
| Brand | Primaflow |
It is approved for water, gas (residential gas range only), and glycol systems.
You will need an M press tool and the corresponding M press jaw for the specific fitting size (15mm in this case).
No, the Primaflow Pressfit system is a flameless installation method, eliminating the need for hot works.
It is a safety feature designed to indicate if a connection has not been properly pressed, allowing for correction before significant leaks occur.
Primaflow offers a market-leading 50-year Manufacturing Defect Warranty.
The fitting has a maximum working pressure of PN16 and an operating temperature range of -10 to 110 degrees Celsius.
These fittings are specifically compatible with all M press jaws and tools.
Ensure the pipe is fully inserted into the fitting and that the M press jaw was correctly positioned and fully actuated. Verify the pipe and fitting are clean and free from debris. Check if the correct M press jaw size was used.
Check the tool's battery charge or power source. Ensure the M press jaw is properly seated on the fitting and pipe. Refer to the press tool's manual for specific troubleshooting steps.
This indicates an improper press. The 'leak before press' feature should have alerted you. The fitting will need to be removed and replaced. Ensure correct pipe preparation and tool operation for the new installation.
Setup: To install the Primaflow Pressfit 90 Degree Elbow, ensure you have the correct M press jaw size for the 15mm fitting. Clean the pipe end and insert it fully into the fitting. Use an M press tool to apply the necessary pressure, ensuring the jaw is correctly seated. The tool will indicate when the press is complete.
Compatibility: This fitting is compatible with all M press tools and jaws. It is designed for use with copper pipe conforming to relevant standards. It is approved for water, gas (residential gas range only), and glycol applications.
Care: Primaflow press fittings require minimal care after installation. Ensure they are installed correctly to prevent issues. If maintenance is required on the connected system, handle fittings with care to avoid damage. Regular system checks as per installation guidelines are recommended.
