National Skirting Reed II Primed Skirting Board - White

Any standard interior paint or gloss suitable for wood or MDF will work. Ensure you use a primer if recommended by the paint manufacturer for best adhesion and finish.

While the MDF is moisture-resistant, it's not waterproof. It can be used in bathrooms with good ventilation, but avoid direct or prolonged exposure to water. Ensure all cut edges and surfaces are thoroughly sealed with paint.

The Reed II profile features a distinctive decorative pattern with both inward and outward curves, creating a contrast and adding a unique visual element, unlike simpler, flat, or rounded profiles.

Each board measures 3040mm (approximately 3.04 meters or 10 feet) in length.

Yes, it is highly recommended to seal any cut edges with a suitable primer or sealant before painting to ensure an even finish and prevent moisture absorption.

The white finish is a primer. It is designed to be painted over with your desired color and finish (e.g., paint or gloss) to match your interior décor.

Ensure the boards have fully acclimatized to the room's humidity before installation. Check for any localized sources of excessive moisture post-installation.

Ensure the primed surface was clean and dry before painting. Use a suitable primer if necessary, and apply thin, even coats of paint. Allow adequate drying time between coats.

Use a fine-tooth saw blade specifically designed for MDF or wood. Ensure the board is securely supported during cutting to prevent chipping or splintering.

Ensure the wall surface is clean, dry, and free from dust or grease. Use the recommended type and quantity of adhesive or fixings for the board's weight and the wall type.