Intex Explorer Pro 100 Boat - 160cm x 94cm x 29cm

The Intex Explorer Pro 100 uses a standard Boston valve, so any pump designed for inflatable boats with this valve type will work. A hand or foot pump is generally recommended.

No, oars are sold separately. You will need to purchase appropriate oars for rowing.

The maximum weight capacity for the Intex Explorer Pro 100 is 80 kg (approximately 176 lbs).

This boat is designed for calm, inland waters such as lakes and ponds. It is not suitable for ocean use due to waves, currents, and potential hazards.

Inflation time can vary depending on the pump used, but typically it takes about 5-10 minutes to fully inflate the boat.

The boat is made from 0.3 mm thick vinyl.

The boat is designed and rated for one person.

Check the Boston valve to ensure it is fully closed and sealed. Inspect the boat's seams and surface for any small punctures or tears and repair with a vinyl patch kit if necessary.

Ensure your pump is compatible with the Boston valve and that the valve is fully open during inflation. Check for any obstructions in the valve.

Confirm the boat is inflated to the recommended firmness. Ensure the weight capacity (80kg) is not exceeded and that weight is distributed evenly.

Ensure the oar locks are properly aligned and inserted into their designated slots. The locks are designed for specific oars, and compatibility with aftermarket oars may vary.