Rycote Undercover - White



Best current price£10.35from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£10.35Visit shop Rycote - Wind Protection - Lavalier Mic Accessory - White
Visit shop


Best current price£10.35from Wex Photo Video
Shopping.co.uk recommended and popular offers
Wex Photo Video£10.35Visit shop Rycote - Wind Protection - Lavalier Mic Accessory - White
Visit shop1 offer from £10.35
View price history by clicking the chart icon.
The Rycote Undercover is designed for professional sound recordists, videographers, and content creators who need to conceal lavalier microphones while maintaining clean audio quality. It provides the key benefit of significantly reducing friction noise caused by fabric movement and low-level wind, though users must be aware that the adhesive Stickies are intended for single-use application on clothing or skin.
| Colour | White |
|---|---|
| Model Part Number | RYC065103 |
| Brand | Rycote |
Yes, the included Stickies are hypoallergenic and designed to be safe for direct contact with human skin.
The fabric discs can technically be reused, but the adhesive Stickies are single-use only.
The Undercover is designed for most standard lavalier microphone capsules, but you may need to trim the parts to fit specific sizes.
The white color is designed to blend in with light-colored shirts, but in very thin or translucent fabric, you should check your monitor to ensure it remains invisible.
The adhesive is intended for a single application; re-mounting the same sticky will significantly reduce its holding power.
Ensure the fabric disc is completely covering the mic capsule and that the fabric itself is not stretched too tightly over the mic.
Ensure the fabric is free of lint and natural oils; some synthetic, high-sheen fabrics may be harder to adhere to than cotton or wool.
Gently rub the residue with your thumb or use a small amount of residue remover safe for electronic equipment.
To achieve the best results, ensure the target area of skin or fabric is clean and dry. Peel a Sticky from the backing, press it firmly against the microphone capsule, and then remove the protective film to mount it in the desired location. Once mounted, carefully press the provided fabric disc over the top of the mic to create a noise-dampening barrier. Because the Stickies use a medical-grade adhesive, they should be removed gently after use to protect both the microphone casing and the talent's skin. Always dispose of used Stickies; they are designed for one-time use and will not maintain structural integrity if re-applied.