Rit Liquid Fabric Dye - Teal

Rit Liquid Fabric Dye is designed for natural fibers. For fabrics with 35% or more polyester, acrylic, or acetate, you should use Rit DyeMore Synthetic Fiber Dye for optimal results.

As a general guideline, one bottle of Rit Liquid Dye can color about one pound of dry fabric. Adjust the amount based on the desired color intensity and the weight of the fabric.

Yes, Rit offers over 1,000 color recipes available on their website that provide instructions for mixing dyes to achieve unique shades. Experimentation is encouraged!

Yes, Rit Liquid Fabric Dye is safe for all washing machines, including high-efficiency models. Ensure you clean the machine afterward to remove any residual dye.

For the most vibrant color, use hot water, ensure the fabric is thoroughly wet and clean, and stir continuously for at least 30 minutes. Using a fabric fixer after dyeing can also help improve color retention.

Yes, if the upholstery or curtains are made of natural fibers (cotton, linen, rayon, silk, wool). Always test on an inconspicuous area first, and be aware that large items may require a larger dye bath or multiple dye batches.

The color is permanent and should last through many washes if properly set. However, like any dyed fabric, prolonged exposure to direct sunlight can cause fading.

Ensure fabric is fully submerged and can move freely in the dye bath. Stir constantly during the dyeing process. Make sure the fabric was thoroughly cleaned before dyeing.

The fabric may not have absorbed enough dye. Try a second dip, ensuring you use enough dye for the amount of fabric. For darker colors, use more dye or a longer soak time.

This can happen with fabric blends or if the fabric was not properly prepared. Ensure you are using the correct dye for your fabric type. Re-dye or consider using Rit DyeMore for higher synthetic content.

Run an empty wash cycle with hot water and detergent, or add a Rit Color Remover to clean the machine.