John Guest Equal Tee - 20mm

This fitting is designed to create a secure branch connection in 20mm underground cold water distribution lines, allowing you to split or extend pipework.

No, this fitting is specifically designed and approved for cold water applications only. Using it with hot water can lead to failure.

It is compatible with standard 20mm polyethylene (PE) pipe typically used for cold water services.

WRAS approval signifies that the product has been assessed and meets the Water Regulations Advisory Scheme standards for use in public water supply systems in the UK, ensuring it is safe for drinking water.

Ensure the pipe is clean, cut square, and inserted fully and squarely into the fitting. The fitting's internal mechanism will automatically create a secure grip and seal.

Each bag contains 15 John Guest Equal Tee fittings.

No special tooling is typically required for installation beyond a pipe cutter to ensure a clean, square cut on the pipe.

Check if the pipe was inserted fully and squarely into the fitting. Ensure the pipe is not damaged or deformed and that the cut is clean and square. Re-seat the pipe if necessary.

Ensure the pipe end is clean, round, and free of any obstructions. Slightly wetting the pipe end may help ease insertion. Verify you are using the correct 20mm pipe diameter.

Confirm that the fitting is designed for the specific pipe size (20mm). Inspect the internal collet for any damage or debris that might prevent it from gripping the pipe effectively. Ensure the pipe is not scratched or scored.